XFX Radeon HD 5450 PCI PCI-e Backplate Full Height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XFX Radeon HD 5450 Backplate Full Height
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find my designs useful, please consider sending a tip
I needed to install a XFX Radeon HD 5450 into a tower PC but the card originally came with a low profile/SFF bracket. The card also took up 2 slots as the VGA port was on a separate bracket.
I remixed an existing bracket with DVI and HDMI, adding a VGA slot and a bit of re-enforcement at the top. 2 versions included: (A) has a smaller re-enforcement block (B) has a larger re-enforcement block
You CAN print this in PLA and it will work but it will be very flexible due to being so thin. I would suggest printing in something stronger than PLA if you can.
Print at 100% infil
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.2 or higher
Infill:
100
Notes:
Print at 100% infil
No Supports required.

Category: Computer