1 / 2
Qwirkle tiles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of tiles for the Qwirkle board game.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A single main file for a set of Qwirkle tile pieces - 18 tiles - that is printed 6 times with the same base filament colour but where each print has a different colour added as a filament colour change (M600) at a height of 6.15mm.
3 additional files are provided of 2-tile ‘pairs’ if spare tiles ever need to be printed.
All the components use 1.75mm PLA and a layer height of 0.15mm with print details for each component produced on an i3 Mk3 shown in the table below.
| component file name/description | brim (mm) | support | filament length (m) | print time (i3 Mk3) |
| shapes_allx3_2block_piece01.stl: the main set of all the pieces for an individual colour. Printed 6 times with different colours started at a height of 6.15mm | 3mm with 0.2mm separation | none | 10.43 | 3h 22m |
| shape1_2block_piece01.stl: a pair of tiles with two ‘top shapes’ only provided if spares ever needed to be printed. | 3mm with 0.2mm separation | none | 1.18 | 24m |
| shape2_2block_piece01.stl: a pair of tiles with two ‘top shapes’ only provided if spares ever needed to be printed. | 3mm with 0.2mm separation | none | 1.19 | 24m |
| shape3_2block_piece01.stl: a pair of tiles with two ‘top shapes’ only provided if spares ever needed to be printed. | 3mm with 0.2mm separation | none | 1.18 | 24m |