1 / 2
Qwirkle tiles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of tiles for the Qwirkle board game.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A single main file for a set of Qwirkle tile pieces - 18 tiles - that is printed 6 times with the same base filament colour but where each print has a different colour added as a filament colour change (M600) at a height of 6.15mm.
3 additional files are provided of 2-tile ‘pairs’ if spare tiles ever need to be printed.
All the components use 1.75mm PLA and a layer height of 0.15mm with print details for each component produced on an i3 Mk3 shown in the table below.
| component file name/description | brim (mm) | support | filament length (m) | print time (i3 Mk3) |
| shapes_allx3_2block_piece01.stl: the main set of all the pieces for an individual colour. Printed 6 times with different colours started at a height of 6.15mm | 3mm with 0.2mm separation | none | 10.43 | 3h 22m |
| shape1_2block_piece01.stl: a pair of tiles with two ‘top shapes’ only provided if spares ever needed to be printed. | 3mm with 0.2mm separation | none | 1.18 | 24m |
| shape2_2block_piece01.stl: a pair of tiles with two ‘top shapes’ only provided if spares ever needed to be printed. | 3mm with 0.2mm separation | none | 1.19 | 24m |
| shape3_2block_piece01.stl: a pair of tiles with two ‘top shapes’ only provided if spares ever needed to be printed. | 3mm with 0.2mm separation | none | 1.18 | 24m |