Wandering Hour Clock for IKEA ROTBLÖTA Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model fit the IKEA ROTBLÖTA Clock which is a bit wider and thinner than IKEA BONDIS Clock.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
How to read the time : The current hour points to the current minute.
This is a rework of the Improved Wandering Hour Clock by David Kingsman.
The original model was made for IKEA BONDIS Clock; this clock being hard to find, I modified the model to fit the IKEA ROTBLÖTA Clock which is a bit wider and thinner.
I changed the mechanism while keeping the concept and look; some of gears are now visible.
The clock has a diameter of 42 cm.
A print bed of at least 200 mm x 200 mm is needed for the printed parts!
You may need to split the MinuteArc.
The mechanism makes use of a Geneva drive to rotate the hour wheels.
The Assembly.pdf file (others files) contains the assembly documentation.
RELEASES
26/01/2025
New version of HelicalGear120R_A.stl file ; it is more openwork to better see the gears.
New version of MinuteArc.stl file ; the height is slightly lower (-2mm).
New version of Deco_Left_Text1.stl file ; update of letters height.
New version of Deco_Right_Text1.stl file ; update of letters height.
New file ClockMecanism_secondsNeedle2.stl ; an other version of the second needle.