Slim Tablet Stand with multiple build-in angles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim and robust tablet/phone stand with four build-in angles, without moving parts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Need a simple slim tablet stand that works in many orientations without fidgeting? Here's a stand with four build-in angles: 10, 20, 30 & 45 degrees. Give it a try.
I couldn't quite find one like it among the many tablet/phone stands on Printables so I made this slim stand to bring with me on travel. It works great for various flight, train & hotel settings, and it's also pretty handy at home.
It supports 4 orientations from up close to further away, with the center of mass centered over the stand for good stability:
Compatibility/Fit
It is sized for a 2023 Pixel Tablet (as shown in the pictures), but it should works for many other tablets.
- The maximum tablet thickness is 9 mm (0.35"); there is also 7 mm thickness variant for slimmer tablets (such as Apple iPads).
- The effective slot depth is 10 mm (0.39"); check the bezel width on your tablet.
- The model easily scales to adjust for size if needed.
Printing instructions
- Any material should work, might even be fun to cut it out of wood.
- No supports needed
- Example printed in PLA, 0.4 mm nozzle, 0.2 mm layer height, 2 perimeters, 15% grid infill, weighing 34 gr (1.2 oz)