Bike Fork Mount Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bike fork mount block that has the block and inserts for Boost mountain bike (15x110) and thru axle road (12x100)
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1026
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D-printed fork mount block is designed with inserts compatible with Boost mountain bikes (15x110) and thru-axle road bikes (12x100). The design improves on other 3D-printed fork mounts by rotating the print orientation 90°, which significantly increases strength.
I use this mount in my truck, but please remember it’s meant for personal use and should be used at your own risk. Test the mount thoroughly to ensure it meets your requirements and is securely installed. For best results, especially in vehicles, I recommend using high-strength, high-temperature materials.
The block can be securely mounted with four #10 screws. I printed the block using Bambu Labs PA-GF filament and PLA for the end caps.