1 / 4
DJI Osmo Pocket Stativhalterung; DJI Osmo Pocket tripod mount — zdjęcie 1
1 / 4

DJI Osmo Pocket Stativhalterung; DJI Osmo Pocket tripod mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DJI Osmo Pocket Stativhalterung; DJI Osmo Pocket tripod mount

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
386
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Halterung für die DJI Osmo Pocket mit 1/4" oder 3/8" Stativgewinde. 
Der Zugriff auf die Speicherkarte seitlich und die Steckdose am Boden bleiben erhalten. 
Die Bohrungen sind für RUTHEX Gewindeeinsätze zum Einschmelzen ausgelegt. 
Für jeden Gewindedurchmesser ist je eine Version für Gewinde von oben/unten, vorne/hinten oder seitlich vorhanden.
Gedruckt mit PLA und 4 (oder 5) Perimeter damit für den Gewindeeinsatz genug Material zum Einschmelzen vorhanden ist.
……………………..
Mount for the DJI Osmo Pocket with 1/4" or 3/8" tripod thread. 
Access to the memory card on the side and the socket on the bottom are retained. 
The holes are designed for RUTHEX thread inserts for melting. 
For each thread diameter there is a version for threads from the top/bottom, front/back or side. 
Printed with PLA and 4 (or 5) perimeters so that there is enough material for the thread insert to melt in.

Tagi