Microwave-style turntable – Horizontal filament spool roller/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large, low-friction turntable for filament spools. No additional parts needed – print everything in three instalments.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A large turntable for filament spools. The print files here (STL) have the outer diameter of 176 mm so that they fit reliably on my PRUSA MINI+. However the SCAD source makes it fully configurable. All dimensions are set at the beginning of the source file.
Printing
To make the full product, you need three prints:
- The bottom
- The top, prints with a lock ring in place, which will separate when you take it off the base plate
- The central suspension, prints with three wheels and three axes
STLs for an individual wheel and an individual axis are also provided for the sake of completeness, but you don't need to print them separately.
Assembly
- Put one axis through each wheel, and push with force into the receiver holes in the suspension – one in each. The axes should go all through the holes, without sticking out the other end.
- Place the bottom on the table
- Drop the suspension on it, with all wheels in the track
- Put the top on
- Push the lock ring on the spindle so deep that it's flush with the top plane.
Note: the lock ring is not strictly necessary but it allows you to pick up the assembly by any part without it disassembling. It is strongly recommended to use it.
Modification
All size parameters of the turntable are set at the beginning of the SCAD source code. You may modify them to suit your needs. The model should adjust tou your changes, but of course they need to make sense. There is no explicit checking, so at least watch for the effect of your changes on screen.
On the other hand, each of the parameters should be configurable separately, so if you need to change one thing about the model, such as the diameter, just make the change and the rest will adjust.