1 / 6
A Court of Thorns and Roses - Bookmarks Set — zdjęcie 1
1 / 6

A Court of Thorns and Roses - Bookmarks Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired by the iconic book series, these bookmarks capture the enchanting world of magic, love, and fierce battles.

Ocena
5 / 5
Polubienia
148
Pobrania
481
Wydruki
7
Wyświetlenia
2932
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

__________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
___________________________________________________________________________________________________________

 


Introducing the "A Court of Thorns and Roses" bookmark set

🌹✨. Inspired by the iconic book series, these bookmarks capture the enchanting world of magic, love, and fierce battles. From the captivating characters to the lush and mysterious landscapes, each bookmark brings a piece of the story to life. Perfect for fans of the series or anyone who loves a bit of fantasy with their reading! 📚🌟 Get lost in the beauty of the courts and bring your favorite scenes to every page you turn!

 

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.2 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Jayo Gray Transmission Distance: 2.1
PLA EryOne Rose Red Transmission Distance: 2.4
PLA+ Jayo Bronze Transmission Distance: 1.1
PLA Jayo Matte White Transmission Distance: 4.2


Color Pallete:

Swap Instructions:

Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #10 (0.88mm) swap to Rose Red
At layer #12 (1.04mm) swap to Bronze
At layer #14 (1.2mm) swap to Matte White for the rest.

Tagi