Bergara HMR Recoil Pad Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1 inch riser for Bergara HMR stock
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 519
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This is part of my set up for LONG distance. I wanted to have a more comfortable configuration when sitting on the bench. Due to having a large amount of elevation correction in my rings and rail and large objective lens I needed to have a higher comb. The higher comb made for a less natural shoulder resting point on the butt pad. This print alleviated that discomfort.
PETG - I printed with 6 walls for perimeter, top and bottom. 35% infill.
My PETG was too shiny so I sanded the outer surfaces and flashed with a torch to get a more matte finish.
I performed a redneck impact test on these by mounting in a vice and beating the heck out of it. It lasted A WHILE before breaking. I have had zero issues with material.