1 / 1
Sovol SV08 SSR & Power Supply cover with fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol SV08 power supply cover with 60mm & 40mm fans for cooling the SSR and supply.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alternate power supply cover that puts a 60mm fan over the AC SSR, and a 40mm fan blowing into the 150w power supply. I printed mine in ABS, but you can likely use PLA or PETG, especially with the fans keeping the SSR & PS cooler than stock.
I'm currently not using an enclosure, so the power supply 40mm fan is connected to PA1 and is running at 100% all the time, and the SSR fan is on PA6 and is temperature controlled by the main board temp sensor until I can run another thermistor to the SSR heatsink.