1 / 1
Sovol SV08 SSR & Power Supply cover with fans — image 1

Sovol SV08 SSR & Power Supply cover with fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sovol SV08 power supply cover with 60mm & 40mm fans for cooling the SSR and supply.

Rating
0 / 5
Likes
5
Downloads
25
Makes
0
Views
451
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Alternate power supply cover that puts a 60mm fan over the AC SSR, and a 40mm fan blowing into the 150w power supply.  I printed mine in ABS, but you can likely use PLA or PETG, especially with the fans keeping the SSR & PS cooler than stock.

I'm currently not using an enclosure, so the power supply 40mm fan is connected to PA1 and is running at 100% all the time, and the SSR fan is on PA6 and is temperature controlled by the main board temp sensor until I can run another thermistor to the SSR heatsink.

 

Tags