1 / 7
Electric Water Faucet/Pump Stand  - Equivalent to Dometic GO Hydration Water Faucet — zdjęcie 1
1 / 7

Electric Water Faucet/Pump Stand - Equivalent to Dometic GO Hydration Water Faucet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Converts a cheap Amazon 5 gal electric jug top mount pump to free standing. Way cheaper alternative to Dometic GO Faucet

Ocena
5 / 5
Polubienia
16
Pobrania
106
Wydruki
0
Wyświetlenia
1450
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I had a standard 3 gallon water dispenser jug and electric water dispenser and picked up this Dometic GO water jug from REI earlier this year. The spigot cap failed (apparently they all do) and I still had the electric pump leftover from when the 3 gallon water jug sprung a leak from the bottom (which this jug replaced for free thanks to an REI coupon) so I decided to make the old dispenser bottle top mounted pump work with this Dometic jug. 

I'm using this cheap pump from Amazon, which is $14 at the time of writing this and it's meant to sit directly on top of a 3 or 5 gallon water dispenser jug.

Dometic sells an "electric faucet" that's almost identical to the cheap Amazon one except it comes with a stand and hose end for a whopping $100 ($80 on sale).

I wasn't going to pay that much so I designed this stand that fits into the cheaper jug top pump allowing this bottle top pump to sit on a flat surface like the Dometic model does. I also modeled it so the hose can exit the pump in whichever direction your situation requires. There are 4 large hose clearances at the bottom but the stand itself can be clocked in 45° increments. 

I printed this oriented with the feet pointing up without any supports. I used PETG with 2 walls and top/bottom layers with adaptive cubic infill at 15% but any other material will work fine unless you plan on using this outside for camping or something, in which case I would recommend a material that holds up in sunlight.

If you need the stand to be taller you can safely scale the print in the Z direction (keep X and Y the same, so uncheck uniform scaling) but I don't recommend making it any shorter, since the ¼" ID water tube needs to be able to bend without kinking. The tube included with the cheap pump is thin walled but the pump outlet will fit a ¼" ID, ½" OD tube.

The only other component needed to match the Dometic version is the hydration bladder connection fitting (o-ring side of a Camelbak quick lock) that fits into the Dometic quick release connection in the cap. 

I ordered these third party brand replacement Camelbak hydration bladder fittings ($8 for two) and it worked perfectly. If you have a hydration backpack you can use the leftover fittings to repair or modify your hoses.

So with a $14 Amazon water pump, a $4 fitting, and a free print file (plus a few pennies in filament) you can have an exact equivalent to a Dometic GO Hydration Faucet for less than a quarter of the price. Which is great because the spigot cap these water jugs come with are guaranteed to crack, as my floofy manager, Teddy, is emphatically pointing out. He's a real stickler for quality control and belly rubs.

Tagi