Liczymy pasujące modele…
MegaXL Spigot SCAR The MegaXL Spigot SCAR (or Silly Scar) is a SCAR attachment for 16mm OD aluminum Nerf hobby barrels that stabilizes darts, is easy to attach and detach, is fully air-sealed, and it allows you to fire MegaXL darts off…
no supports needed print in one piece
This is a replacement spigot for a Reliance water jug. I used Teflon tape on the threads to get it water tight.
This is the ideal choice of PCAR if you want both the Silly Spigot mounting system as well as Thanh's new RIPPCAR geometry. Variations The internals of every variation are the same as the RIPPCAR, the only thing that changes is the outer…
This single-piece attachment makes dispensing laundry detergent effortless — ideal for anyone who finds the small rubber button on top of the spigot hard to press. It’s simple, quick to print, and works exceptionally well. Unlike other…
Adapter Spigot: Standard 6.4mm and 9.5mm threaded ends for compatibility Tripod adapter spigot with universal 16mm diameter Ideal for use with a variety of stands and grip gear Attachment (Bottom) 3/8″ screw, 5/8″ (16mm) stud Top…
This part fits GE refrigerators with an interior water dispenser. I found that the water spigot tube was angled too close to the wall and was difficult to fill many cups and water bottles. This standoff slides on and holds the tube at a…
* IMPORTANT: My first design broke after a few uses due to the stresses on the printed collar that fits over the valve stem, just like the OEM version. I have modified some of the tolerances since then to strengthen the design in the…
Model Info | Introduction I want to introduce you to an easy-to-print Spigot Adapter for Tripods - typically used as Lamp Mount and available as follows: The standard threads from a normal tripod were used: I made several improvements and…
Dimensions : Handle is ~45 mm in diameter. Shaft (or offset from cabinet or drawer) is ~18 mm long. Screw hole is #8-32 and 15 mm (~5/8") deep. Hardware required : Like most cabinet or drawer knobs, this requires an #8-32 screw and has 15…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) The spigot on Reliance water jugs are notorious for not sealing well, and/or cracking due to over-tightening due to poor alignment of the spigot. This…
Modeled after the ZERN hydrant key, part number P1300-PART-13-KEY according to Google Lens. There are other “water keys” on Printables already but I felt up to the challenge of modeling this little key for our maintenance staff and the…
This is for your faucet to keep from rotating and eventually breaking and leaking. This is a 2 piece construction so you can fix your broken faucett bracket without re-plumbing anything. This is a 2 piece construction, so you can fix your…
Silly Shell --- Sniper Barrel + MEGA XL Spigot Silly Shell with 13mm ID barrel to rear load and shoot short darts or Elite darts. The spigot at the front can shoot MEGA XL darts. This Silly Shell has a length of 198mm and is much longer…
Here's an adapter that connects a standard shower massage wand to a standard garden hose spigot. Looks a lot nicer than the kludge I used to use. I use it bathe my dogs and to rinse off after the pool. Handy at the beach or lake to rinse…
(Updated) MEGA Dart Launcher Spigot- Easy Barrel Insert - v.1.2 The air restrictor and the dart post has to be removed otherwise the airflow is to low. (With the Micro2, you can simply use pliers to break out the air restrictor from…
Info and printing information found here (original) https://www.printables.com/model/873465-spigot-scar-silly-scar-half-dart-and-megaxl/commentshttps://www.printables.com/model/873465-spigot-scar-silly-scar-half-dart-and-megaxl/comments
A simple piece to launch a Nerf Elite Missile from the barrel of your Nexus Pro! Shoots about 6 Meters (20 or so ft) level. There is a full size (50mm) and an shorter (35mm) launcher. The 35mm one is pictured and tested by me. The longer…
I made this top part of a tap for a broken glass water dispenser Use the function in your slicer to lay the part down on it's flat side. Washer is used on a nail or pin (ø1.75mm).
This a model for the mating threads on a Tide detergent bottle, allowing the spigot to be removed and repurposed. Print with smallest diameter on the build plate. Finer layer height will decrease the “saw-tooth” pattern on the the…
Small Mount to use the existing Screw-Mount Holes of the WAX610 Models to mount the AP to your 17mm Spigot Stand. The ¼ Inch Screw is optional and only needed, if you are planning to mount the AP upside down. Printed on P1P with PETG and…
With this adapter, you can mount flash mounts on tripods with spigot heads. For example, a flash on a tripod or a lamp on a tripod. You need a rubber ring with an inner diameter of 30 mm or 1-2 pieces of canned rubber. Recommended: PETG…
The generic Silly Spigot Scar is already a great design, however at higher FPS on blasters you would want a less aggressive rifling angle for increased accuracy. Print with z seam at sharpest corner 3 Walls Wall ordering outside to inside…
The metal handle broke, so I created a replacement. Thought I would share. I made this for outdoors to chose PETG for the material. Print Settings Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.20mm Infill: 20$ Filament brand:…
Just a multipurpose mount for clamps and other things to 5/8" lighting/grip spigot. Instructions Place a 1/4" bolt inside and insert using an arbor press or tighten into place with a nut. Place a nut inside on the side and pull into place…
This adapter plate for the HTC Vive Base Stations allows you to mount the base stations onto a 16mm spigot, commonly found on light stands/tripods, by using the included wall mounts. You can use the included M5 screws and nuts to attach…
Anti-frost hose bibbs (e.g. this product ) move the spigot valve inside your house to keep them from freezing. For proper installation the bibb needs to be installed at a downwards angle - mine did not include the washer mentioned in the…
Just print as it is
A simple tool to provide more leverage for turning on and off Oval and tapered rod shaped water spigot handles for those with reduced grip strength. (1.875" x 2.5" oval grip, 2.25" x ~0.5" tapered rod style grip) There's a recessed hole…
A very niche model, but if you own the ZeroWater 30 Cup Pitcher then you know the pain of having to hold down the very stiff button for what feels like an eternity. This model attaches to the spigot and adds a lever you can toggle for…
Print a set of these models and one of your preferred Silly Spigot Nut . You can use 1-½"x3/8" insulation pipe foam to fill the void
Spigot ring to fit P2 Volvo cars (V70, S60, XC70) with 65.1mm hub diameter and adapt to 67.1mm hub diameter. Used for over a year with no problems on a 2004 Volvo V70 with XC90 Atlantis alloy wheels (printed in PLA, PETG should fair even…
Spigot handle for 9/16" hex head shaft. Tools are imperial so if your system is in mm scale to 25.4mm/in or 2540% Category: Tool Holders & Boxes
I used 3 walls with alternate extra wall enabled. 5 top and bottom. 99% tri-hex infill. Printed in PETG. -Cheers
This is probably the fastest and most convenient way to mount an action camera from GoPro to a light stand. I created this thing so it would literally take me less than 5 seconds to mount my GoPro to any lightstand and capture…
These spigot adapters are best for light lighting fixtures I would recommend 1kg max ) - for example Godox S30 or some small panel lights. Students lost these all the time so I made a model not to buy one every week. Files Included Mirror…
A quick remix to add an o-ring between the aluminum barrel and the SCAR attachment, giving a reasonable boost in range.
Convert M6x25 hex/allen key bolt to 5/8" spigot Goes great with https://www.printables.com/model/520331-eurobrite-mount-100150 High layer heights and plenty of perimeters recommended, I used 0.6mm nozzle. Fusion model at…
Printed with solid PETG to resist gas fumes. Elliptical shape prevents rolling away. Also includes a string hole to keep it with the can.
Bored of using a tripod? With this model, you can securely attach your flash to a wooden pole. This model is designed for a wooden pole with a 22mm diameter.
They take around 60s to print per pair, I printed at 0.1mm later height. Ensure your XY hole calibration is good otherwise they won't fit. Mine weren't very tight going into the holes but it was good enough and serves it's purpose…
Drop in replacement part for the ice-maker filling and emptying spigot on the left side. Back cover of the machine has to be removed for installation of this part. Fully compatible with the original silicone plug and M11 cover nut. Base…
The Little Rocket Spigot is an adapter for Little Rocket Barrels and my Little Rocket PCAR to attach to 16mm or similar OD exposed metal barrels. In combination with my Little Rocket PCAR, this allows you to leave your Little Rocket…
A RIPPCAR adapted to fit into stock Dart Zone and X-shot muzzles! It can also fire MXL as a spigot. It also brings down the stock Nexus Pro X and Stryker 2.0 from 200 fps to about 165 fps for super stock games. Refer to the original model…
This Adapter Snaps on to the Drain Outlet of the SCA-1200HT Support Cleaning Apparatus In order to point the flow of Liquid down instead of out. If there is back pressure I could see the Liquid trying to make its way out the slots between…
The water came out just a tad too slow, made a minor adjustment to the lever.
Print in TPU so it is soft and flexible like a normal gasket would be. My original one cracked and my spigot was leaking from the top so I unscrewed it and found a simple little gasket so I created this from the original. There is both a…
Needed a new spigot handle, the design is based off of a vintage spigot handle optimized for FDM machines. I printed this one out of PCTG at 25% infill. I typically provide the timelapse of the print however due to the geometry and…
Spigot type handle for 13/16's hex head shaft. Category: Parts
Updated: Version 2 fits over the body of the Freeze Miser. I discovered that the water drips from between the Brass tube and the plastic body. Snap grommet to allow Freeze Miser drip pipe to extend outside a Frost King soft Spigot…
I didn't want the kids turning on my water outside anymore. I started with removing the handle. But decided I would have a little fun and design a handle that would just spin if they tried to use it. This only required me to print 2…
The union that holds the faucet's outlet pipe. This is to prevent the water from squeezing the pipe out.
This is a replacement handle for Prier 400 series anti-siphon wall hydrants (AKA "frost-free hose bibs"), a type of exterior hose spigot/bib/hydrant/faucet valve common in the US, and sold at various times under the Prier or Mansfield…
Print with wall mount side flat on build plate
This bushing allows the insertion of the 1-1/2 pipe into the 4" pipe. The connection is intentionally not glued so that if the 4" in-ground pipe shifts or freezes, the drain waste pipe connection can move up or down. I needed to connect a…
Spigot SCAR but with porting to expel excess air as it the dart leaves the barrel
My kids kept turning on the garden spigot and they would get soaked and then leave it running causing big mud patches in the yard. I quickly designed this and tried it out, it works perfectly. I should have modeled it with straight holes…
A quick and dirty IP camera mount to attach a Ubiquit Aircam Dome to a standard 5/8" spigot fitting, like a Manfrotto superclamp or lighting stand. Insert a 1/4-20" nut inside the fitting, and use a 1/4-20" bolt to form the clamp.…
Sizing tool When mounting bowl blanks on geared chucks you will need to decide if you want to mount the workpiece with a spigot or using a recess . With a spigot the chuckjaws will clamp from outside and hold fast to the spigot. With a…
Check spigot size You can check the size of your spigot with this. If this part fits your spigot, it will surely mount on the Record Power standard jaws. If not - lets hope the spigot is to big. Will allow you to check spigot size when…
The Fraucet Buddy is here to save a bit of time and energy! Protect your outdoor spigots from the cold / windy days of winter. Walls are 10mm thick, so plenty of thickness. It should fit over most spigots, but the ones i tried on were…
The Repeater Pro Silly Spigot Collet is a 3D-printed muzzle upgrade for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece O-ring clamp this mod part makes performance tuning easier with quick,…
Overview When mounting crossbars, horizontal backdrop poles, or side-oriented grip gear to standard light stands, mounting a Super Clamp directly to the vertical top pin can restrict positioning. This model provides a 90-degree horizontal…
This design allows you to insert a spigot into a tripod in place of the center column. It is ideal for mounting lighting and accessories during photography. Suitable for a center column diameter of 28 mm. Printed with 3 perimeters and 25%…
A Silly Spigot PCAR made to work with the Kar98k Cub and Small Lee. So now you have a PCAR option for the muzzle, and can launch Mega XL darts.
ASA, 60% infill, Layer 0.2mm, Nozzle: 0.4mm, Nozzle Temperature: 250°C, Heated bed: 110°C
This is the ideal choice of PCAR if you want both the Silly Spigot mounting system as well as Thanh's new RIPPCAR geometry. Variations The internals of every variation are the same as the RIPPCAR, the only thing that changes is the outer…
Silly Shell --- Sniper Barrel + MEGA XL Spigot Silly Shell with 13mm ID barrel to rear load and shoot short darts or Elite darts. The spigot at the front can shoot MEGA XL darts. This Silly Shell has a length of 198mm and is much longer…
Print in TPU so it is soft and flexible like a normal gasket would be. My original one cracked and my spigot was leaking from the top so I unscrewed it and found a simple little gasket so I created this from the original. There is both a…
Spigot SCAR but with porting to expel excess air as it the dart leaves the barrel
This part fits GE refrigerators with an interior water dispenser. I found that the water spigot tube was angled too close to the wall and was difficult to fill many cups and water bottles. This standoff slides on and holds the tube at a…
A quick remix to add an o-ring between the aluminum barrel and the SCAR attachment, giving a reasonable boost in range.
![Spigot Adapter for Tripods - Lamp Mount [optimized, very stable]](https://media.printables.com/media/prints/914396/images/6985523_4ca1cba2-a9e8-4ba1-ad80-1b1e99e8a7c2_7703b03e-9b61-4a54-8809-08f529a5feed/a.png)
