ZeroWater 30 Cup Pitcher Spigot Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Niche hands-free spigot adapter for ZeroWater 30 Cup Dispenser
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 306
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A very niche model, but if you own the ZeroWater 30 Cup Pitcher then you know the pain of having to hold down the very stiff button for what feels like an eternity. This model attaches to the spigot and adds a lever you can toggle for hands-free pouring.
Extra parts required:
4x M4 Bolts 30mm long
4x M4 Nuts
2x M3 Bolts between 8mm and 12mm long
Reference Photos for assembly. The M3 bolts should spin freely in the hinge piece but should cut threads into the plastic of the lever piece when assembled. Note that the lever piece has an orientation. The rounded part of the short end should be what makes contact with the button when the lever is in the up position. When the lever is pushed down, the flat side of its short end should be parallel to the button surface.
All files print flat with one support necessary for the hinge piece.