Spigot SCAR (Silly Scar) (Half Dart and MegaXL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple SCAR attachment that allows you to fire MegaXL. Attaches to standard hobby-spec 16mm OD aluminum barrels.
- Ocena
- 4,833 / 5
- Polubienia
- 218
- Pobrania
- 2260
- Wydruki
- 38
- Wyświetlenia
- 8269
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MegaXL Spigot SCAR
The MegaXL Spigot SCAR (or Silly Scar) is a SCAR attachment for 16mm OD aluminum Nerf hobby barrels that stabilizes darts, is easy to attach and detach, is fully air-sealed, and it allows you to fire MegaXL darts off the end of your blaster!

The scar has three parts to it: The SCAR barrel itself, a locking nut used to tighten it to the barrel, and an 016 o-ring that goes around the barrel. This o-ring is what the SCAR nut tightens against.

If you don't have an 016 o-ring, a rubber band can be used as a replacement to keep the SCAR in place. The rubber band will not provide the air seal to the SCAR, but that isn't necessary for it to function at a basic level.
There is also a part called BarrelCap, which is basically just something to put over your muzzle so you don't core-sample someone with your sharp metal barrel. It connects to the barrel the same way as the normal SCAR.
MegaXL Spigot SCAR Print Settings
Print all of the SCAR at 5 walls 20% infill. The threaded end of the SCAR faces the build plate. No supports are necessary, but a brim might be needed to print smoothly.
Make sure the Z-Seam is straight down one side of the SCAR. Otherwise, it might not launch MegaXL as nicely, and it looks bad with misaligned Z-Seams.

Sellers
These SCARs are also available pre-printed from these sellers (and more):


Misc.
If you build any of my designs, I'd love to see yours! Feel free to message me on Discord (Sillybutts#5905) or tag me on a post on Reddit (u/SillyTheGamer).
Thanks to OutOfDarts and SilverFoxIndustries for providing photos.
The thread for this collet is derived from CaptainSlug's collet on the Indra.
China: 你好! 我擁有這個設計。 想生產請聯繫我. 你好! 我拥有这个设计。 如果你想生产,请联系我.
The models marked 'Trivictus' are using remixed SCAR rifling geometry from Thanhtacles's SCAR design: https://www.thingiverse.com/thing:4967719
Donations
If you like what I do, please consider supporting me!
I don't charge for my files, so any donations or merch purchases would be greatly appreciated!
- Patreon (Monthly donations)
- Buy Me A Coffee (One-time donations)
- AWESOME shirts made in collab with Brandon Diaz
- RedBubble My merch shop, full of fun Nerf-y stickers and shirts!