P
Printables
ex/silly collet
I printed the ex bcar and was satisfied about the performance but the collet was kinda fragile, so I made this.
Wyniki wyszukiwania: silly
Liczymy pasujące modele…
P
Printables
Silly Shell --- 6x Short Darts --- Airtight Barrels (3x2 Short Darts / 18x Foam Balls)
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
P
Printables
Molle Silly shell holder 3x
print the holder itself out of PETG for durability, the molle plate can be printed in anything. you need 2 m3x8 screws. (or superglue, i can't stop you)
P
Printables
SillyPilot - Silly Shell conversion for the Nerf Rival Pilot
Introduction After hearing the news that Sillybutts was pausing the development of his Silly Shell kit for the Nerf Pilot i decided to try my hand at the same concept: Introducing the SillyPilot! This kit requires minimal modding of the…
P
Printables
Tulip Silly Collet Front End
Front end for a tulip except now it uses a sillybutts collet instead so you don't have to kill your favorite barrels. Requires a screw front from any other model that uses a sillycollet (at least I think they're all the same) Untested,…
P
Printables
Sillybutts Foxbat pump action priming system
This grip attaches to the front slide of the Foxbat nerf blaster and slides on the bottom picrail, aided by a few rollers for smooth operation. I have remixed the default front slide to include mounting holes for 4-40 plastic screws.…
P
Printables
Silly Shell -- 4x / 5x MEGA Dart -- (for Anemone, Wildstyle etc.)
Silly Shell – 4x MEGA Dart (for Anemone, Wildstyle, barrel launcher attachments, etc.) I combined a Silly Shell with air duct dart posts to shoot multiple MEGA Darts simultaneously with good performance. Minimized dead space through air…
P
Printables
Silly Shell -- 9x Short Darts -- Airtight Barrels 3x3 Short Darts -- Triple Ramrod
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
P
Printables
Silly Shell --- Sniper Barrel + MEGA XL Spigot
Silly Shell --- Sniper Barrel + MEGA XL Spigot Silly Shell with 13mm ID barrel to rear load and shoot short darts or Elite darts. The spigot at the front can shoot MEGA XL darts. This Silly Shell has a length of 198mm and is much longer…
P
Printables
Silly Shell -- 12x Short Darts -- Airtight Barrels 3x4 Short Darts -- Triple Ramrod
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
P
Printables
Silly Shell Angled 4x Elite
Angles 4 elite dart chambers outwards and separates their chambers to reduce air leakage. Pinches darts so don't leave them loaded. Print with support on the inner separator. 5-21-25: added variant with a central supporting pillar to help…
P
Printables
Silly Shell - No Hardware Sniper Shell
A variation of the sniper Silly Shell that doesn't need any hardware, just filament and super glue. 2 printed barrel options are included for different sized beds, 1Ft and 10 Inches. As far as I can tell there isn't much loss in speed…
P
Printables
Boomdozer Sillyshell Cylinder
If YOU have a Boomdozer sitting around taking up space, you're too poor to afford a Shellfish or a Breacher, or you just want a powerful modular shell blaster, then this design is for you. My cylinder (more of a spindle really…) holds 6…
P
Printables
Sillybutts Breacher Halo Reach M45 Cosmetic Kit
No hardware required Fusion 360 and STEP file are provided if modifications are needed ISSUES: The cheek rests do are not aligned properly leaving a channel between them, but the 3d model does not have the channel, so I don't know what…
P
Printables
Alternate 3x Elite Silly Shell
Yet another 3x shell. Unlike many versions with separate chambers, this one keeps the chambers together so you don't have inconsistent performance between darts when all the pressure escapes before every dart exits, as well as slightly…
P
Printables
Alternate 5x Elite Silly Shell
Revisited the 5x shell and made it easier to print (no supports) and strengthens the dubious pillar in the middle by connecting it to the rest of the walls while fitting 10 half darts flush (even 38mm ones). Fires out of the goblin but…
P
Printables
Updated QD sling points for Sillybutts Breacher
Print with the same profile sillybutts provides. Both parts shown in the photos were printed without supports on a Bambu Lab A1 and work just fine.
P
Printables
6x elite silly shell
i'm pretty sure this is the maximum amount of elite darts that can fit inside a standard silly shell. The portion of the shell in which the darts are held starts at 10mm and ends at 80mm so two 35mm darts will be able to sit flush with…
P
Printables
Ontos - Low Profile Silly Collet nut
A low profile Silly Collet Nut for the Ontos. I wanted a Silly Collet since I prefer tightening my barrel with O-Rings, but the kit I bought had a smaller barrel (300mm), so I needed to free up some space in order to attach my RIPPCAR.…
P
Printables
RIPclip sillyshell stripper clip for homemade nerf blasters
"so what actually is a RIPclip?" the RIPclip is a ecosystem of 3d printed sillyshell stripper clips for homemade nerf blasters. the design is meant to be extremely compatible with pretty much any blaster design someone could make and was…
P
Printables
proper sillysledge adapter with lock
silly sledge v30 i guess, spent half a week prototyping the ejection but didnt get it to work, everything else dimensioned correctly works well, have fun! feel free to remix this again to get it to eject properly if you would like to ask…
P
Printables
Trident (Silly Shell Pistol)
A Bottom Loading Silly Shell Pistol. This is designed too look kinda like that one pistol from Kingsman, yea that one. These files are in BETA at the moment. The hardware is NOT going to change. I am fine tuning the Latch - to - Latch…
P
Printables
TF2 Hitman's Heatmaker (Nerf blaster mod from Sillybutts Foxbat)
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice You need the original Foxbat kit , plus the following: https://docs.google.com/spreadsheets/d/1KOiNNJb-DsYRX4Xing8HacSmP-WwXPeXNfO9-ASy6mA/edit?usp=sharing…
P
Printables
Silly shell belt holder
i printed in PLA with 5 walls and 25% infill but for this it's probably over kill but fell free to print how you feel
P
Printables
Captain's key | A ramrod primed silly shell master key for picatinny blasters
Hello! the idea for this attachment came to me when i wanted a shorter version of existing masterkey options, i started out wit a string plunger rod system with a pump grip, but ZafC and Null helped me come up with this much simpler and…
P
Printables
silly little valentine
I added a red LED in the heart that only works when the 2 rexies are "holding" the heart. Everything is printed out of PLA. you can use whatever settings you want sinds there are no extreme forces at play. 3D printed parts: 2x rex 1x…
P
Printables
Sillybutts Breacher Lifter Roller with Bearings (Smoooother Prime)
A new version for the “Lifter Roller” with ball bearings. I had the problem that the screw thread had eaten into the lifter roller (see pic), causing a lot of friction and making it very difficult, or even (if I pushed slowly) impossible…
P
Printables
Sillybutts Breacher Flat Trigger
A modern looking comfy trigger for the Breacher by Sillybutts. Metric! For imperial measurements you can modify the .step file :)
P
Printables
Active Retention 8x Silly Shell Caddie
Want to John Wick reload? Want to have more silly shell attached to you than you know what to do with? Well do I have just the thing for you! This is a silly shell caddie with a capacity of 8 shells per plate. It uses a spring driven…
P
Printables
Super Silly Scar
A super long version of the Silly Scar. It is just the spigot and has no actual scar rifling, the other parts are at the original model by Sillybutts.
P
Printables
Silly SCAR Male to Male Adapter
I needed to connect 2 Silly SCAR female attachments together, so I created this to do just that.
P
Printables
Shellter - Silly Shell-Ejecting and MXL Blaster (Low Hardware)
Safety Disclaimer This began as an April Fool's project--do not shoot Sillyshells at people or animals. Nobody wants a hunk of plastic hitting their head at 30mph. Depending on the material you shoot at, your shells could chip or break.…
P
Printables
The FIN-isher. An oblong trajectory 3-point silly shell
Does what it says on the proverbial tin. Side arrows facing up indicate that the shell is firing with the wide points out to the side, while a lack of arrows indicates a tall formation, rather than a wide one. I chose to print with 4…
P
Printables
Silly Big Ben
Love Big Ben? Love wacky, waving articulated toys? Feel mostly positive about the Queen? By howdy… do I have the print for you. This is Big Ben, just… not as you remember him. He wiggles. He bends. He absolutely refuses to take himself…
P
Printables
Silly Shell Storage bottom tray
A tray that goes on the bottom of your silly shell storage grid (w/ a tiny bit of glue) to easily be able to pick them up and move them Posting your makes is appreciated and feel free to ask questions :
P
Printables
Silly shell holders (no hardware)
put the pin in the hole so it stays in place, no screws or heat inserts required at all.
P
Printables
Silly Cat/Boykisser Keychain/Badge
Printable with AMS or layer material swap. Included are large and small ("smol") variants, and source SVG files - use them to your liking. You can also print the white and black parts separately and glue them, especially to make a…
P
Printables
Grizzle the Cat - Silly Meets Angry
Meet Grizzle , the sassiest little fury ball in the Silly Meets Angry Collection. With her chubby body, tiny paws, and dramatically furrowed brows, Grizzle looks like she just heard the treat jar is empty—or worse, that someone moved her…
P
Printables
Cluckrage the Chicken - Silly Meets Angry
Meet Cluckrage , the loudest little storm in the Silly Meets Angry Collection. With her round body, tiny wings, and dramatically furious expression, Cluckrage looks like someone just touched her last egg. Her wide-open beak and intense…
P
Printables
Rumble the Elephant - Silly Meets Angry
Meet Rumble , the tiniest thunderstorm in the Silly Meets Angry Collection. With his raised trunk, sharp little tusks, and outrageously furious expression, Rumble looks like he just declared war on absolutely everything. His round, chubby…
P
Printables
Sillybutts' Smiley Ram Base - Talon Version
Sillybutts made a great remix of the Smiley ram base that improves upon the geometry of the -123 o-ring grooves so that they're easier to print without supports. However, the ram base included with the Talon remix of the smiley has…
P
Printables
Silly cat keychains
These three little guys can live on your keys there are three expressions to chose from (So far Write Any Expression suggestions in the comments) Silly cat keychain 1- Tired/durpy Silly cat keychain 2- worried silly cat key chain 3-…
P
Printables
Silly Shell holder for Better Printing
this is a remix from Ready's silly shell holder that can print easier and not need Supports.
P
Printables
Mega-Modded Silly SCAR (or technically PCAR)
This is a lengthened Silly SCAR that allows you to fire Mega darts instead of Mega XL! Why? Well, because I like my faux “suppressors”, and I have a ton of Mega darts and basically no Mega XL. And hey, your gamemode may use Mega XL as a…
P
Printables
FIXED Mega-Modded Silly SCAR/PCAR
I've fixed the funnel at the bottom of the MEGA version, since it had a step in it that required supports to be printed correctly and prevented the correct sealing via o-ring. Print it as per Sillybutts instructions: 5 walls and 15% infill.
P
Printables
double sided silly scar adapter
use it to put a silly scar on the rival adapter I made. use supports.
P
Printables
Silly Shell Titan barrel
I wanted the ability for my titan to fire silly shells and since nobody has made one yet i did it myself
P
Printables
Silly Spitting Llama
At first glance, she might look a bit silly – and honestly, she is. But I think it's impossible not to love her. 😍 Despite her look, she's just so adorable. However, be careful, she loves spitting at people she doesn't like. 💦 If you'd…
P
Printables
Mega Modded Silly SCAR/PCAR (6 Lines version, Merlynn)
The original model of the Mega Modded Silly Scar only came in a 3 line version, so I added a 6 line version using the Silly Scar Simple Redesign model. I have had great success using the 15% infill, 5 walls profile recommended by the…
P
Printables
Silly Pokèmon Gengar
Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤
P
Printables
Rainy's Silly Shell Holder
This is Rainy's Silly Shell holder, a simple design to hold 6 silly shells in two rows of three for storage or to aid in loading lots of silly shells. uses about 150G of filament. Print in whatever settings, file should not be picky. STL…
P
Printables
Nerf Silly Shell Carriers/Holders - Picatinny Mounted
Video overview here: Usage demo here (0:23): ---------------------------------------------------------------------------------------- These are shell carriers/holders for Silly Shells ! They all hold Silly Shells horizontally across the…
P
Printables
Rush - SillyCollet Shroud and Mono Rail
Couple small parts mods for the Rush by shoelesshistorian. The long rail adds a little rigidity but only really works if you have a big printer. The collet on the shroud only mostly works and I'm not sure I really recommend using it.…
P
Printables
Silly Pokèmon Magikarp
Follow us on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ The most kawaii & funniest Magikarp you've ever seen! Print it in one color, paint it or print in multi-color version🔥! I used Blender (for Windows) and Nomad Sculpt (for…
P
Printables
PBR Bow top bar Silly Shell mount/holder
I haven't printed this yet (but will in a couple days), so I cannot confirm it works. I ordered my hardware kit and am printing all of my parts right now, I will add an addendum when I build the PBR bow to confirm or deny functionality.…
P
Printables
ex/silly collet
I printed the ex bcar and was satisfied about the performance but the collet was kinda fragile, so I made this.
P
Printables
Moo Deng with silly hats collection
Print with supports. Check out creators of the original models! Original model by: M oo Deng od autora Heribertohobby | Stáhněte si zdarma STL model | Printables.com Top hat: Top Hat od autora higglyblarg | Stáhněte si zdarma STL model |…
P
Printables
Sillybutt's Alchemist Side Picatinny Rails
I modded Silly's Alchemist files, to be able to have side picatinny rails on the Alchemist. Minor changes were made following the original design and hardware pattern.
P
Printables
Sillybutts larger plunger head
my o-ring had a bad seal so I slightly increased the o-ring stretch
P
Printables
Silly Pumpkin
Thought the TikTok vid was hilarious so I decided to quickly model the pumpkin. I printed it upside down with supports only on the brim of the head. https://www.tiktok.com/@adamhammmmm/video/7424688839437880619?lang=en
P
Printables
Silly Pumpkin Pen Holder
This small pumpkin pen holder is perfect for the fall season. He'll sit on your desk and look at you all day with a silly smile. Can be scaled up or down depending on what you want out of your pen holders. Test print on my printer went…
P
Printables
Sillybutt's Foxbat one piece slide
By request. A one piece slide for the Foxbat that has been lengthened a bit to be flush with the duck tail. I also spaced out the front and rear sights for a longer sight picture. The slide is 302mm long so you will need to have a printer…
P
Printables
Silly Shell Storage Grid
Wanted to start bringing my Silly Shells to games and wanted a method that was a bit better than “just throw them in a box”. So I put together a simple grid of holes to hold onto the shells. The grid is designed to allow the shells to…
P
Printables
No-hardware picatinny Sillyshell holder
A Picatinny-mounted Sillyshell holder. It's designed so you can fit multiple on the same rail with no extra space between, and with no screws required for easy accessibility. This print holds the shells perpendicular to the rail, a design…
P
Printables
Silly Shell - Quad Rival
Rival Silly Shell except I maxed the internal depth to allow squishing 4 Rival in (depending on how squishy they are) and also increased bore by .25mm(radial) to increase performance.
P
Printables
Silly Mistresskey
Shoot SillyShells from (most) picatinny mounting points with the Silly Mistresskey! (MistressStyle? SillyKey?) The front lever ejector means it has to be mounted at the end of a picatinny rail though. And the (relatively) long pull means…
P
Printables
Silly shell adapter for Xshot longshot Barrel Collet
This allows you to shoot silly shells using your longshot. MAKE SURE YOUR LONGSHOT HAS A STRONG SPRING. The stock spring will work, but not very good at all. You will also have to download the lever and the piece that you screw the silly…
P
Printables
Picatinny Silly Shell Carrier x6 - Made for SillyButts Battle Axe Top Rail
I like the springy arms of the PBR holder by TheSockCollector (especially in PETG) and wanted to use it on the picatinny top rail of my SillyButts Battle Axe like the one Ready made for the Wildstyle… So I mashed them together really hard…
P
Printables
Pivoting Shell Catcher for the Battle Axe by SillyButts
I really like Mighty Shrub's pivoting shell catcher on my Firefly so I remixed it for the Battle Axe by SillyButts. Fits very nicely alongside my Battle Axe top rail shell holder:…
P
Printables
40MAX shell to Silly Shell adapter sleeve
This allows you to put a Silly Shell Nerf shell on a 40MAX shell base. (Also compatible with 40WAD shell bases.) https://outofdarts.com/products/40max-40wad This should be compatible with any Silly Shells that fit the standard Silly Shell…
P
Printables
63mm Half MXL Nerf Dart Cutting Jig for the Silly Shells/Battle Axe by SillyButts
Silly Shells won't feed properly in magazines if the dart heads stick out past the rim of the shell. Cutting an MXL down to 63mm cuts the foam into two even halves. The 63mm dart sits about a quarter inch below the shell's rim and the…
P
Printables
Silly Toaster Handles for Cuisenart CPT-70
I received a new toaster that was missing the handle. What else is there to do but print new ones. These were designed from SVG files in Tinkercad. The “hole” file for the toaster insert (the male) bit seems to be pretty common among…
P
Printables
The Silly Face Name Plate
Yea the nameplate says yooooo on it for some reason guys download so i get free spools!1!!!
P
Printables
silly shells holder x3
silly shell holder for 3 shells for picatinny uses m4 screws x 30mm and m4 nuts
P
Printables
KerfurO Dummy 13 Silly Cone Hat
A simple cone hat for a silly robo cat. Can be mirrored to fit other side of head.
P
Printables
Flak Silly Shell Remix
Shoot Silly Shells lever action style! I'm surprised someone didn't make this sooner, it seems like such a perfect fit! I guess the FLAK wasn't as popular as other CS blasters, given the lack of hardware its :p I'm not too experienced…
P
Printables
Silly Shell Launcher Attachment -with Silly SCAR thread -shoot darts through
Silly Shell Launcher Attachment fits the Silly SCAR thread and you can also shoot darts through it! Airtight launcher for Silly Shells for 16mm aluminium barrels. Fits all Silly Scar threaded nuts and uses also an o-ring seal to the…
P
Printables
Silly Shell --- 6x Short Darts --- Airtight Barrels (3x2 Short Darts / 18x Foam Balls)
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
P
Printables
Ex Rev2 BCAR Sillyshell shroud
THIS IS NOT INTENDED AS A STANDALONE SHELL! It is intended only as a BCAR adapter for Sillyshell muzzle adapters like mine or the one made by Corvus . It uses the Rev 2 EX BCAR thread mount and, as such, it is compatible with all of its…
P
Printables
Sillybutts Chimera Plunger Head
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…
P
Printables
Remix 4x Elite Sillyshell (with air distributor)
This is a remix of Sillybutts SillyShell. I remixed the shell to ensure that no more air escaped through the middle of the four darts. I designed a small air distributor that sits in the back of the shell. It funnels the air directly into…
P
Printables
4x Brass Barrel Silly Shell
This Silly Shell uses 17/32-inch brass barrels on the insides for hopefully better performance. You can cut the barrels flush with the shell to let it feed into a Battle Axe, or you can have them stick out for a sniper barrel.…
P
Printables
Molle Silly shell holder 3x
print the holder itself out of PETG for durability, the molle plate can be printed in anything. you need 2 m3x8 screws. (or superglue, i can't stop you)
P
Printables
inline clip silly shells
PLEASE USE THE V2 - IT IS SO MUCH BETTER Extended the silly shell and put the inline clip inside it I made a inline 3 to inline 6 inline 6 shell is smaller then 256mm was made in Bambu studio
P
Printables
Silly-Shell ESPER
Not a lot of description for this one, it's a remix of the two and low-hardware; you'll need an ESPER PT, plunger orings, a face seal oring, a couple screws, and elastic. I don't expect many people to build it, but the step is included so…
P
Printables
60 Degree Silly Spigot Scar
The generic Silly Spigot Scar is already a great design, however at higher FPS on blasters you would want a less aggressive rifling angle for increased accuracy. Print with z seam at sharpest corner 3 Walls Wall ordering outside to inside…
P
Printables
Prototype Picatinny Mounted Silly Shell Blaster
Disclaimer: Old slapdash thing I made Silly shell blaster using mostly hardware you can harvest from an x-shot longshot or removed from it after upgrading (while leaving the longshot functional): screws, 1 mag retention spring, plunger…
P
Printables
Silly letter T with foxes (1)
Silly letter T with foxes three variants, 20 cm, two colours / three colours
P
Printables
Silly letter T with hidden hedgehog (2)
Silly letter T with hidden hedgehog 20 cm, two colours
