Iron Sights for Sillybutts Excalibur
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixed sights for Nerf blasters (Sillybutts Excalibur). Front sight features a small aperture for longer shots.
- Ocena
- 4,75 / 5
- Polubienia
- 38
- Pobrania
- 116
- Wydruki
- 4
- Wyświetlenia
- 856
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring).
Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be careful when tightening).
Use a 3mm or 1/8" drill bit to open the thru hole on the countersink. The M3 screw shaft should pass freely through the countersink side.
Print both sights with the flat, front-facing surface on the build plate.
Front and Rear Sight:
Layer height: 0.2mm
Perimeters: 5
Horizontal shells: 4 (top and bottom)
Infill: 15% gyroid
Brim: none
Note: Rear sight does not need supports, but a painted organic support enforcer for the small bridge/overhang in the skeletonized triangle results in a slightly cleaner bridge.