Iron Sights for Sillybutts Excalibur
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixed sights for Nerf blasters (Sillybutts Excalibur). Front sight features a small aperture for longer shots.
- Rating
- 4.75 / 5
- Likes
- 38
- Downloads
- 116
- Makes
- 4
- Views
- 857
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring).
Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be careful when tightening).
Use a 3mm or 1/8" drill bit to open the thru hole on the countersink. The M3 screw shaft should pass freely through the countersink side.
Print both sights with the flat, front-facing surface on the build plate.
Front and Rear Sight:
Layer height: 0.2mm
Perimeters: 5
Horizontal shells: 4 (top and bottom)
Infill: 15% gyroid
Brim: none
Note: Rear sight does not need supports, but a painted organic support enforcer for the small bridge/overhang in the skeletonized triangle results in a slightly cleaner bridge.