Liczymy pasujące modele…
Excalibur is a pump-action blaster with plenty of power, quick spring swapping, and the ability to swap between full length darts or half length darts on the go!…
Only the one true king may draw the sword from the [book], go on, pull it with all your might, you cannot free it from its--- w-what do you mean it “broke off”?!? Cursed Gauls and their magic potion! A pair of bookmarks based loosely on…
This is a kit card of the YF-19 Excalibur from the anime Macross Plus. It was suggested by Koobs7 over on Thingiverse, had a look at it and decided to make it because reverse wing aircraft are pretty cool looking. Normally I would give…
This is a great puzzle to give as a gift because you can hide gifts like money inside the blade, There are two versions of the blade which is detachable from the handle and tip. All the pieces are separate so you can print in different…
This is excalibur from fate stay night used by Arturia, also known as Saber. It's currently cut in pieces for a 200x200x180 buildplate, but you will also find the full stl in case you want to slice it yourself. The sword has an 8mm hole…
в цій головоломці завдання вийняти меч "Екскалібур". Але вам постійно заважатиме стукіт меча низу. Тому ваші мізки обов'язково заворухнуться!
A sword handle (modeled after the sword in the 2017 film King Arthur: Legend of the Sword) that is hollowed out to accept a ½" dowel rod, so that floral foam can be attached to make a bouquet. Print at 400%
**I do not own any of the rights to the original piece that this custom, fan-made interpretation is from ** This is Arthur Boyle's ‘Excalibur’ sword from the popular anime, Fire Force. I created this to hopefully be built functionally…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring). Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be…
Excalibur - King Arthur - 1981
Hi this is my design of the Arthur Pendragon Excalibur sword from fire force but it's collapsing. Probably will try to make a better one at some point.
This is the sword Excalibur from Terraria
Parts: 4 different versions are provided, which contain various levels of detail: "Excalibur Campus Full" contains the main tower and its power regulators, as well as the surrounding generators and solar panel arrays "Excalibur Campus…
Lightning-infill really shines here. I also included a simple configurable crossguard to make your knife look more swordy. Remember to use a brim for the guard to help the spheres stick to the sheet. Legend says that the one who can pull…
This is Excalibur. I found a lot of video game versions of Excalibur, but I wanted the more-original Excalibur from the movie, so I designed a handle that matched the movie version. And here you go.
Excalibur (from BBC's Merlin) The Excalibur from BBC's Merlin series, perfect for your costumes or figurines. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: No r equired Brim: Not required Infill: 15-30%
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Made the sword Arthur uses in Fire Force. It is designed in a way that everything can be printed in the correct color. Only the crossguard requires support if you print it upright like i did. I did this for quality because i did not paint…
He That Holds This Sword Shall Be the One True King
Here is a 90% screen accurate reproduction of the Holy Grail from the 1981 John Boorman epic movie Excalibur. While designing the Grail, Boorman and art director Robert Pratt visited the Victoria and Albert Museum in London for…
I updated this model as it was kinda hprrible before but here is a more detailed and accurate excalibur from fire force im a 13 year old creator so the model might not be perfect
A 3D Modelled prop of the famous Excalibur in a Rock.
This part is to replace the original lock on the Hobbyking Excalibur canopy. I have lost the factory lock, it was never reliable. This is printed in one piece. Use 0.1mm resolution. No supports needed. The last picture indicates the…
I don't carry many keys, but there are three that I do need with me at all times. Unfortunately, those few keys have scratched a couple of expensive phone screens over the years, when I've inadvertently jammed them together in the same…
Fantasy Sword King's Arthur Excalibur Powered by MakerWorld-Imaokge-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Fantasy Items here: https://www.printables.com/@StudioMechanik/collections/2975356
Needed something to store my Excalibur crossbow quivers when not on the crossbow so I made a small hanger that they slide into and can be hung on a wall
Shotgun slide foregrip designed for a Sillybutts' Excalibur. May need to be modified for other Nerf-style blasters. The foregrip requires: Three #4 (3/8" long) self-tapping screws (you will have some left over from the Out of Darts…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Head for Omer 100 Excalibur harpoon, printed in ABS
Replica of Excalibur as appears in Disney's The Sword in the Stone (1963). Anvil wall mount pays homage to iconic image
Turn your robot vacuum into a legendary knight on a quest! Left side of the Sword (Excalibur) Right side of the Sword (A.D. 1136) This 3D-printable kit includes: Front Sword — a blade that declares your cleaning crusade. 2X Side Blades —…
The Sword in the Ancient Tree is a mystical fantasy scene inspired by legendary tales of enchanted blades waiting for their rightful wielder. A beautifully detailed longsword stands embedded within the twisting trunk of an ancient tree…
takes a 0.25 in dowel, is split for printing. Category: Props
I couldn't get a good scale from the original posted from @sillybutts, so I re-rendered to scale. No other edits or alterations have been made. Included flat side for printing support aide, I recommend printing this at 100% Infill, with…
The True Excalibur is Sir Radzig's Sword If you do not believe me, try for yourself! I designed this with a little help from my two boys. (You can see them on my profile picture) This is how it works. (After printing and assembly – see…
a fully colored and accurate excalibur from sword art online
Quick insert for my old Excalibur grain mill to help flow the grain into the stones. People will say its annoying, but I use 2 butter knives to remove it to clean when needed. No knobs or handles on top so lid can be placed on. I printed…
This is an organizer for the Roxley board game Excalibur - just a simple tray to neatly hold all the tokens, with room on top for the swords, manual and player aids.
The Excalibur Threaded Breech is a replacement breech part designed to allow the Sillybutts Excalibur to accept 16mm threaded-breech barrels. Featuring a brass threaded insert in place of the barrel-retaining O-rings, this drop-in…
I made this in an attempt to stay up late while fixing my sleeping schedule. Still Pretty new to tinkercad so have pity. Fits together nicely although may take a little work due to low tolerance, i did this so it could firmly hold the…
This is a replacement for the standard latch on the excalibur. I used a 3mm knurl insert nut in the center. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: 200 Infill: 25% Category: R/C Vehicles
Sillybutts has done a great job with Excalibur. However, there aren't great ways to attach a sling. You can use a picatinny attachment near the front to for a sling point, but there aren't any good options for the back of the blaster.…
My version of Arthur's original Excalibur sword hilt. I wanted to give modelling it a try because I really like the simplicity of it's design Added the sheath to the files
I have limited counter space and needed to be able to stack my Excalibur dehydrator trays when loading them up or removing them to cool. This is my quick and easy solution. They do not snap in place but they fit snugly enough that you can…
This is a Dj knob made for a contest, it consists of the excalibur of the legend.
Original design made by my son, a nazgul inspired gnome wielding excalibur
Excalibur stuck in a pumpkin
Instead of using a fully 3D-printed stone, this model can be embedded into a real stone by placing it in a drilled hole and securing it with concrete or another suitable material. The outer diameter of the zylinder, that is inserted, is…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Excalibur Stäbchenhalter
Sehr schöner Dosen halter den muss man haben Für 250ml Dosen
Printable H4 bars for the stock bars on Excalibur. Did not include the superfluous hole from a standard H4 bar and they obviously aren't threaded. These work great on Excalibur since they're just under slight tension and they feel plenty…
I picked up a relatively busted Excalibur dehydrator for cheap to use as a filament dryer, and many of the plastics were damaged. This is a replacement rear cover, which optionally has space for a switch to be added as the unit has no…
F150 camera shroud for use with Putco's Excalibur Light Bar
Print a FRONT and a REAR unit and slide them onto your top rail. Each is a stout, full-wrap clamp that grips the whole rail profile — not a shallow lip (the real reason cheaper clamps pop off when you sling the blaster) — locked down by…
A great addition to any desk of a writer, artist or just a fantasy nerd! Easy to print (mo supports needed) 2 colors without a multi color printer Fits a variety of pens, pencils and brushes (hole is 9mm) How to print Configured .3mf file…
the damn greatest sword in all the lands...
I couldn't get a good scale from the original posted from @sillybutts, so I re-rendered to scale. No other edits or alterations have been made. Included flat side for printing support aide, I recommend printing this at 100% Infill, with…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Replica of Excalibur as appears in Disney's The Sword in the Stone (1963). Anvil wall mount pays homage to iconic image
Here is a 90% screen accurate reproduction of the Holy Grail from the 1981 John Boorman epic movie Excalibur. While designing the Grail, Boorman and art director Robert Pratt visited the Victoria and Albert Museum in London for…
a fully colored and accurate excalibur from sword art online
A great addition to any desk of a writer, artist or just a fantasy nerd! Easy to print (mo supports needed) 2 colors without a multi color printer Fits a variety of pens, pencils and brushes (hole is 9mm) How to print Configured .3mf file…
The True Excalibur is Sir Radzig's Sword If you do not believe me, try for yourself! I designed this with a little help from my two boys. (You can see them on my profile picture) This is how it works. (After printing and assembly – see…
Original design made by my son, a nazgul inspired gnome wielding excalibur
This is a kit card of the YF-19 Excalibur from the anime Macross Plus. It was suggested by Koobs7 over on Thingiverse, had a look at it and decided to make it because reverse wing aircraft are pretty cool looking. Normally I would give…
A 3d-model of the sword Excalibur used by Saber from the Fate series the model is designed for 3d printing and inclues both a full model and one split up into 6 part for easy printing and assembly using 4mm support rods
A 3d-printable model of the sword Excalibur from the ALO part of the anime Sword Art Online made by commission This includes a full model as well as one split into 9 parts for assembly using 4mm support rods
A 3d-printable model of the hilt of the sword Excalibur from the anime Fire Force This includes a full model as well as one split into 2 halves with a hollow space inside to include electronics for an LED blade
This is a collapsing version of King Authur’s famed sword from the 80's movie Excalibur. The pommel is removable so you can print the blades separately and replace them. To remove the pommel, you just unthread one side which will unclamp…
Modeled this up, takes a 1/2 in dowel through the center, split for smaller printers.
