Ergonomic shotgun slide pump grip for Sillybutts Excalibur
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ergonomic shotgun slide/foreend/foregrip for Sillybutts Excalibur. Brings the support hand closer to the operator.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Shotgun slide foregrip designed for a Sillybutts' Excalibur. May need to be modified for other Nerf-style blasters.
The foregrip requires:
- Three #4 (3/8" long) self-tapping screws (you will have some left over from the Out of Darts hardware kit)
- Two M3x30mm Socket Head Cap Screws
Use both screw types as self-tapping, and be careful when driving them in.
Slide the pic rail spacer (see black part in the picture) into the foregrip before assembling.
Print settings
Layer height: 0.2mm
Perimeters: 5
Horizontal shells: 4 (top and bottom)
Infill: 20% gyroid
Brim: none
Supports: none
Print with the back of the foregrip (the flat side with the D-shaped hole) down on the build plate (tall orientation).