Ergonomic shotgun slide pump grip for Sillybutts Excalibur
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ergonomic shotgun slide/foreend/foregrip for Sillybutts Excalibur. Brings the support hand closer to the operator.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 38
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Shotgun slide foregrip designed for a Sillybutts' Excalibur. May need to be modified for other Nerf-style blasters.
The foregrip requires:
- Three #4 (3/8" long) self-tapping screws (you will have some left over from the Out of Darts hardware kit)
- Two M3x30mm Socket Head Cap Screws
Use both screw types as self-tapping, and be careful when driving them in.
Slide the pic rail spacer (see black part in the picture) into the foregrip before assembling.
Print settings
Layer height: 0.2mm
Perimeters: 5
Horizontal shells: 4 (top and bottom)
Infill: 20% gyroid
Brim: none
Supports: none
Print with the back of the foregrip (the flat side with the D-shaped hole) down on the build plate (tall orientation).