Silly SCAR Silencer Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silly SCAR in silencer style with forced straight Z-seam on the outside for a cleaner look.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 690
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Silly SCAR in silencer style with forced straight Z-seam on the outside for a cleaner look.
The rifling for the dart twist and the thread is identical with the original Silly Spigot SCAR.
Fits any 16mm barrel.
I added the knurled nut here but all other nut versions from the original Silly Spigot SCAR can also be used.
Update 27.1.2025:
Added blank (faux barrrel) versions with no rifling inside (standard length and short)Update 10.9.2025:
I’ve also included all versions without the forced Z-seam, as this is no longer required when ‘staggered Z-seams’ is enabled in your slicer.
When ‘staggered Z-seam’ was activated, the forced Z-seam actually had a negative effect for me, and the Z-seam was no longer in a vertical line but offset!
----------------------------------------------------------------------------------------------------------------------------
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
no supports needed
Thanks to Sillybutts for the files I could use for this remix.