P
Printables
Xshot MPP Motorized Piston Pump AEB Anti-Rattle Battery Spacers
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
Wyniki wyszukiwania: xshot
Liczymy pasujące modele…
P
Printables
Xshot MPP Motorized Piston Pump BCAR Clamp
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
P
Printables
XShot Motorized Piston Pump 'Utonagan' handguard - long version (remix)
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…
P
Printables
ITS AVERAGE!!! (downgrade barrel for xshot mpp)
ITS AVERAGE!!!! - slightly longer barrel (230mm stock> 120mm >80mm 'micropp') and is an optimised and tested length with higher accuracy and MUCH less drop over ~10m . Probably best for 150fps cap games but don't have a chrono :/ * EDIT I…
P
Printables
Rear Picatinny For XShot Longshot
Wanted a mag holder on the rear so i combined these two models
P
Printables
XShot Clip Mania Shroud with Picatinny Rails (extended)
Basic shroud for XS CL, made in F360. I printed this but it didn't fit properly, so this newer version should allow a little wiggle room. Included both longer and shorter pieces, long one is about twice the size of the stock barrel. Print…
P
Printables
Xshot Motorised Piston Pump Buffertube QD Sling Mount
QD Sling was used for a day crawling though tall grass, dropped onto sling multiple times for sidearm use. Normal sling will fit too. This model is ambi for those left handers out there! Test fit and drop before use! Printed in petg 50%…
P
Printables
Redcowl Xshot MPP M-LOK front end
Lengthened stubby front end with mlok + upper rail. Uses M4 hardware for the upper rail.
P
Printables
Xshot Ragefire Tripod Adpater
An adapter to make your Xshot Ragefire and Dart Storm compatible with a standard camera tripod. Hardware required: 1 1/4-20 heat set insert - I used an 8mm one Some way to set it in place This is designed to print without added supports.
P
Printables
XShot Piston Pump - Short Stock
Print it flat on the side with the built-in support flat on the bed. there's another built-in support inside the stock. You shouldn't need any slicer supports for this. One M3 voron-spec heatset and one 8mm M3 thumbscrew are needed
P
Printables
Accents for XShot Fury X handguard and collet
Files in print orientation You have to glue these on, pretty self explanatory.
P
Printables
Project Blue Handguard for XSHOT Motorized Piston Pump (MPP)
Collect is still accessible, and it locks the handguard in place, meaning no tools or other parts are needed. Other features include the free-floating design, front and rear Picatinny, and slim profile perfect for a C-clamp. I printed…
P
Printables
Pick-Rocket 2 (Xshot Menace) Little Rocket Barrel Lug
I updated the old fixed mega Barrel from my old design and replaced it with something more modular. 1x 16mm oring needed or something symilar in size. The Air Restrictor needs to be removed. And use some teflon or E-tape to make a seal…
P
Printables
XShot Longshot Jam Resistant Pusher
This replacement pusher design aims to mitigate several jamming scenarios with the stock pusher on the XLS which may be caused by stacking tolerances, including: Darts getting stuck in the pusher ring Darts getting pulled backwards on…
P
Printables
XShot MPP Flared Magwell (Tighter Fit)
The original part would fall out occasionally. I redesigned this to have a slightly tighter fit and added a feed ramp the front of the magwell entrance. You will need to remove the three screws in the XShot MPP magwell area to spread the…
P
Printables
Xshot Longshot Spring Spacer
Spring spacer for the XLS. Adds ~10mm of precompression 7.5mm, 12.5mm and 15mm sizes also available. Slight edge on the outer end to help the spring stay aligned. Highly recommend you print this in 100% infill for durability reasons. Not…
P
Printables
XShot Gun Bullet Head Replacement
If you're a fan of XShot guns, you know the struggle of losing bullet heads during action-packed play. This 3D-printed replacement bullet head is designed to fit perfectly with XShot guns and functions just like the original! For extra…
P
Printables
Silly shell adapter for Xshot longshot Barrel Collet
This allows you to shoot silly shells using your longshot. MAKE SURE YOUR LONGSHOT HAS A STRONG SPRING. The stock spring will work, but not very good at all. You will also have to download the lever and the piece that you screw the silly…
P
Printables
XSHOT RAGEFIRE RAGECAGE
Here at DMF we are all about fixing minor inconveniences from stock blasters. The RAGEFIRE cage was not aftermarket motor friendly. So I present the RAGECAGE. The crush is set at 42.5mm and fits with the stock cage insulators. You could…
P
Printables
Zuru XShot Longshot 1" Rail Riser
11" long Picatinny rail lifted 1" from the stock XLS rail. Designed as 5 separate pieces, with the supports each being a separate piece, the rail split into two pieces for ease of print, and a printed pin to index the front with the XLS…
P
Printables
Xshot Cluch spacer
increases the HyperGel Cluch power from the original 150FPS to an estimated 170FPS. step1: unscrew and remove the pump grip step2: unscrew and remove the body cover note: this is not the first time i have modded this blaster, and i am…
P
Printables
Xshot Ragefire - Dual Stage Cage
Remix of BuffdaddyNerf 's X-Shot Ragefire flywheel cages, added a second stage for increased performance. Hitting around 200-210fps with Kraken 3s motors into Loki 3s motors, all with Kepler flywheels on a 3s lipo. Hits around 130-150fps…
P
Printables
Xshot Fury X Collet Frontend
Print with no supports, pull out the stock barrel and throw this one in. Don't have a printer? Order from OOD! Affiliate link !
P
Printables
Tribute SCAR for 19mm Dart Zone Or Xshot Muzzle ports
A remix of Chance's Tribute PCAR to work with dart zone and xshot 19mm muzzle ports on their pro blasters
P
Printables
Zuru XShot Pro Fury-X Barrel Collet
These files are not to be sold without my permission. I designed a barrel collet compatible with the Zuru XShot Pro Fury-X, allowing you to use custom barrels with a 16mm outer diameter that are longer than the original stock barrel. To…
P
Printables
XSHOT Fury WCAR
Edit: I added WCARS from 1-12 degrees. I designed this to fit the new XShot Fury blaster. It uses M4x8mm machine screws and M4 Washers (instead of bearings). It seems to work really well and only loses about 5 fps. Let me know how you get…
P
Printables
Pick-Rocket 2_ Xshot Micro Reshell // Nerf Attachment
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…
P
Printables
XShot Ragefire 120 round extended ammo box, Bruce Leedle Remix
Print facing up, 3 walls, 15% gyroid, supports ideal but not needed. The L and XL need to be printed vertically to fit on the build plate to fit. I'm currently working on the Giga Box which has a goal of 200 rounds with cardboard walls…
P
Printables
XShot Fury Stock / Pull Handle
This is a simple mini stock / pull handle / prime extension for the XShot Fury. You will need to take the existing screw out and drill the hold to 3mm then attach using an m3x25 machine screw.
P
Printables
Dart holder for Xshot rail
Holder for 3 dart It can be used on the rail for Xshot. Printing just PLA - without supports. If you want other accessories, don't be shy to write to me. Gun:…
P
Printables
Xshot Fury X SCAR Collet Stock Barrel Remix
A remix of the Xshot Longshot Barrel Collet V2 by RedCowl Scar that lets you use the stock barrel of the Fury X
P
Printables
xshot longshot turnaround
When I replaced my x-shot longshot plunger tube the turnaround was brittle and cracked, this will replace that turnaround, use the original barrel o-ring. It need a little bit of support when printing. I printed it at 0.2mm, 2 walls, 15%…
P
Printables
Xshot Fury X pusher fix
Had some problems with the pusher catching on the back of the darts in the mag and damaging them, so I did this. Works really well from what I see. The instalisation instructions are shown on the photos. be careful not to remove too much…
P
Printables
XSHOT Tripod Picatinny Quick Release (Print-In-Place) | XSHOT Stativ Picatinny Schnellverschluss
EN: The youngsters were of the opinion that a Picatinny quick release for the XSHOT Tripod was urgently needed. In order to be able to enjoy my well-earned rest again, I quickly put together this adapter remix for an M12x45 screw. Thanks…
P
Printables
Xshot Longshot - Threaded turnaround
Drop in replacement for the Xshot longshot turnaround with a threaded barrel insert to suit worker style barrels. M16 x 1.0 ↓12mm Print upright with the mag end of the turnaround on the print bed. Supports required. O-ring may be tight…
P
Printables
Xshot Longshot - Safety replacement (left handed)
Safety toggle for the Xshot longshot to suit lefties. Recessed patterns you can colour for visual feedback. (acrylic model paint used in the cover photo) Print with the flat side touching the build plate, Should be fine without supports.…
P
Printables
XShot Fury X Fore Grip
It's a fore grip for the XShot Fury X. I have big hands, and other options either didn't work for me, or were too small, or blocked the safety. This one is longer, and sticks out a little from the front of the blaster. This would pair…
P
Printables
XShot Longshot O-Ring Barrel Collet
This is a quick remix I threw together to allow me and my girlfriend to change barrels interchangeably between our Fury-X and and Longshots, I find the O-Ring system alot nicer to use than a fixed collet as it is alot more convenient. My…
P
Printables
Picatinny stock for xshot fury x
I couldn't find a really good stock to use with the excellent mounting point created by @LikeThePlatypus , eventually I stumbled on ReptilianSnail's stock for the parallax, which had the exact style I was looking for, but needed a bit of…
P
Printables
XShot Longshot BCAR/WCAR/DCAR
Made to work perfectly with a stock XShot Longshot. I extended the mounting area to 19 mm to get rid of the empty space that can hinder performance. I also added a screw hole on the side of the mount and expanded it to be able to screw it…
P
Printables
XShot Pro Motorized Piston Pump Barrel Shroud
If you are like me and absolutely despise the exposed barrel on the end of the new XShot AEB, then this model is for you! I designed this barrel shroud to match the general aesthetic of the blaster, as well as add some extra rail space on…
P
Printables
XShot Motorized Piston Pump id Barrel Shroud
This is a barrel shroud for the XShot Pro Motorized Piston Pump. It adds a top Picatinny rail, M-LOK slots on the sides and bottom, and points for a ball detent sling point (untested). For a 0.4mm nozzle w/ 0.2mm layer height: - 5 walls,…
P
Printables
Xshot MPP - Buffertube Castle Nut
Replacement castle nuts for the buffertube stock on the Xshot Motorize Piston Pump blaster. I recommend trying the 04_clearance files first and then going down to 03 if too loose, 05 if too snug. On mine the first .5cm of threading was…
P
Printables
XShot Motorized Piston Pump id Roller SCAR Cover
This is a cover for the original roller SCAR that comes with the MPP. It just friction fits onto the SCAR with ~0.1mm of tolerance, so it should be fine for any BL or similar printers with nice tolerances. I printed this on a Sovol SV08…
P
Printables
XShot Motorized Piston Pump Spring Swap Tool
Easy, fast, and great if you're lazy or have short fingers. It fits into the white plug that holds the spring for the MPP View all files at https://pngu.info/files
P
Printables
Pick Rocket 2 (Xshot Menace) 3 Dart Inline Clip
Replaces the front cover with a 3 dart inline clip. Print with 15% infill with cubic infill
P
Printables
XSHOT QUICKSLIDE RAIL
This is a rail for darts. It can be used for the xshot quickslide. Made for 15 darts and 10 darts. Add tree/organic support (on build plate only).
P
Printables
XShot Piston Pump AEB Spring Cap Removal Tool
A simple and easy-to-print tool that allows you to effortlessly remove or re-insert the spring cap of the XShot Piston Pump AEB in seconds! The two examples seen in the photos are printed in PETG (dark green) and PLA (brown), PLA and…
P
Printables
Xshot AEB Motorized Piston Pump MPP Magwell Plates
Update 9/5/25: Added Smiley and Stern emoji plates. Easy to print plates that friction fit into place. Blank set included so you can add your own logo or design. MPP Improved sights:…
P
Printables
Xshot AEB Motorized Piston Pump MPP Improved Sights
Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…
P
Printables
Xshot MPP - Spring Spacers
Spring spacers for your MPP. Available in 2.5mm-10mm sizes, can technically stack them but I don't recommend it. Start small and go from there, I don't know what the max safe precompression on the stock spring is. Print something like…
P
Printables
Xshot MPP - Stock Thread Samples
Sample geometry to match the threading of the buffer tube since it's non-standard. The numbers on the end of each file are the clearances on the M29x1.5mm baseline; +0 is no clearance, +2 is .2mm oversized, -3 is .3mm undersized. Use the…
P
Printables
Xshot AEB MPP Motorized Piston Pump Jam Door
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
P
Printables
Xshot AEB MPP Motorized Piston Pump Handguard (Multiple Sizes)
Update 8/6/25: Fantasy themed add-ons (last photo) can be found in the remixes. Update 8/3/25: Added a small Mlok picatinny rail that can be installed in any of the mlok slots. Update 8/1/25: New Small and XS handguards available for…
P
Printables
Compact Battery Stock for the Xshot Motorized Piston Pump
The mpp is pretty long (about the same as a stock harrier or swift). Can't do much about the core or barrel so here's an ultra compact stock that can fit a battery as wide/thick as the stock one or one as long as what the BK1S uses. Print…
P
Printables
XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU 90 Deg Battery Compartment
Wanted to add a small 90 degree battery compartment for the new XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU Print the lid where the tabs are facing up. Print the battery case upside down with support for the screw only. I use…
P
Printables
XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU Jam Door Picatinny Rail
Wanted a replacement sleeper jam door for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. This is a replacement drop in jam door replacement for the stock jam door. This adds an easier way to open the door and also gives you…
P
Printables
*Experimental* Trigger Shim for the Xshot Motorized Piston Pump
Jammed during a game and then fell out. Didn't notice Evan had already made one so use his instead https://www.printables.com/model/1365018-trigger-pull-reducer-for-x-shot-pro-mpp-aeb-motori/files Shim the trigger switch to engage faster…
P
Printables
Low Profile Ring Pull for the Xshot Motorized Piston Pump
Low profile ring pull. print with supports on the hook
P
Printables
Xshot AEB Motorized Piston Pump BCAR Shroud
Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…
P
Printables
Xshot Pro Motorized Piston Pump replacement barrel collet nut
UPDATE 04.08.25: added thicker version that is closer to the original for handguard addons that clamp to the collet nut, like the terrier handguard by LoneWolf052 replaces the easily cracking barrel collet nut of the PP. i recommend…
P
Printables
Xshot AEB Motorized Piston Pump MPP Buffer tube Stock
Modeled to resemble an old fixed stock but still retains adjustability along the buffer tube. Fits the original xshot mpp battery and also has a secondary space for storage. Models are print oriented and require support. If you really…
P
Printables
Xshot MPP Motorized Piston Pump AEB Anti-Rattle Battery Spacers
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
P
Printables
Xshot AEB Motorized Piston Pump MPP Mag Release
Update 9/6/25: Added V2 versions of both styles with improved grip pattern. 2 styles available. Friction fit (FF) and Hardware (HW). No support needed and models are print oriented. I recommend a .4mm nozzle or smaller due to the fine…
P
Printables
Xshot AEB Motorized Piston Pump MPP Display and Charging Station
Update 8/9/25: Adjusted the geometry of every base to better fit the magwell. Designed to fit: MPP Blaster Magazine Up to 15 Darts Barrel BCAR (with or without a shroud) Battery (has a cutout for charging while on the base) Charger Name…
P
Printables
Xshot MPP Collet Frontend
This mod requires the blaster to be opened, and replaces the stock collet that comes on the blaster. It does re-use the breach from the stock blaster - which is pressed into the “Replacement Internal Mate” as seen below. The collet can go…
P
Printables
Xshot AEB MPP Handguard Fantasy Add-on Pack
A unique way to make the handguard standout and more public friendly. Unicorn version retains the front sight mount for the original iron sight. The dragon version uses the nose horn as a sight instead. Models are print oriented and will…
P
Printables
Xshot MPP Motorized Piston Pump BCAR Clamp
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
P
Printables
XSHOT METEOR MXL BARREL
This insert turns the xshot meteor into a MXL launcher. It will also shoot muzzle loaded full-length and half darts. Remove the air restrictor and and glue the insert in the front if the plunger tube. Cut out the front rival barrel in the…
P
Printables
Xshot MPP Motorized Piston Pump No Spin Buffer Tube Ring Clamp
It's my experince that 3D printed buffer tube rings, no matter how tight they were, always needed retightend after a couple of mags. Only accentuating the issue of the spinning buffertube due to the wear on the threads. This easy print…
P
Printables
Xshot Piston Pump Picatinny stock mount replacement
This will allow the user to replace their stock Piston pump Stock with a Picatinny version. (Pictured here is a folding OOD Momentum stock) INTENDED USE IF YOU RELOCATE THE BATTERY ( In the photo I have an external XT-60 for a remote Lipo…
P
Printables
XShot Motorized Piston Pump 'Utonagan' handguard - long version (remix)
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…
P
Printables
Chance's XShot MPP Shroud
Introduction A replacement frontend for the XShot Motorized Piston Pump blaster. This shroud replaces the stock front orange piece (and its collet). It uses the tension-band barrel retention system I've been using on some of my personal…
P
Printables
Iron Sights Color Inserts __ Easy Aim __ X-Shot MPP __ Xshot Motorized Piston Pump
Iron Sights Color Inserts __ Easy To Aim + Clearly Visible __ X-Shot MPP The line of sight is parallel to the barrel. Rectangular rear and front sights at same height for easy and quick aiming like classic open sights. It is best to print…
P
Printables
Xshot Motorized Piston Pump MPP LVOA Handguard(Multiple Sizes)
Update 8/15/25: Four new shorter sizes have been added (XS, S, M, L) making for a total of 5 sizes. The full size hanguard works best with the original barrel length. Update 8/14/25: A wrap around grip has been added to the files. Print…
P
Printables
Xshot BCAR Shroud + Barrel Color Sleeve _ MPP _ X-Shot Motorized Piston Pump _ (or LONGSHOT 2.0)
Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…
P
Printables
Xshot MPP Motorized Piston Pump AEB Flaired Magwell REMIX
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
P
Printables
Nerf Xshot Holographic Sight
This is a Sight or scope that will fit on most nerf rails (not compatible with 20mm rails or real gun rails)
P
Printables
Utonagan handguard for XShot MPP Picatinny Grip Remix
REQUIRED HARDWARE : - 2x M5x30mm socket head screw - 2x M5 Hex nuts (Nylon lock nuts recommended) Can be printed without support
P
Printables
XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU Secondary Mag Release Extension
Secondary mag release extension for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. Hardware Required: 2 - M3x10mm screws Print Orientation: Outer sides facing down.
P
Printables
Xshot Insanity Ragefire camera tripod pintle mount
A custom pintle mount for your ragefire. Uses 2 M3-12 screws and any kind of 4mm-ish screw, I used an old drywall screw… It's a little tight, and it's not quite perfect. Either way it works for me and can work for you.
P
Printables
Xshot Motorized Piston Pump MPP Charging Handle Extension
Simple print that uses less than 10g of filament. Adds width and grip to the existing charging handle. Making it easier to grab from either side speeding up your reload time. No need to modify or disassemble the blaster. Friction fit into…
P
Printables
Xshot MPP Motorized Piston Pump AEB Magazine Bumper
Reload With Peace of Mind Two basic versions included. Original and Shock. The original version mimics the original magazine bumper. The shock version includes cutouts that act as crumple zones(when printed in tpu) and 8mm of extra…
P
Printables
Zuru XShot Piston Pump - Bolterized
It's a quick and dirty mashup of models made by people more talented than me. The objective is to make what's quite an awkward looking blaster look a little more like a Warhammer 40k Bolter. The picatinny rails are attached with 4x M3x10…
P
Printables
XShot Piston Pump DIY Bullpup Kit
Take any barrel shroud for your beloved MPP and make it into your own cursed bullpup! It requires two M3x10mm screws, but outside of the wiring, it re-uses the spring on the pull mag release (since you won't be using it anymore,) you can…
P
Printables
XShot Piston Pump Charging Handle Vacation Home
If you ever wanted a less traditional priming handle, here you go! Perfect for any bullpup builds such as: https://www.printables.com/model/1399742-xshot-piston-pump-diy-bullpup-kit Or use it standalone. I won't tell you how to frost your…
P
Printables
XShot Piston Pump BCAR Shrooods
It covers your stock XShot BCAR with something fancier, bulkier, and reasonably more stylish. Or gaudy. Whatever goats your float. Print tolerances may vary, so size to your desired friction fit. The spacer is designed to specifically fit…
P
Printables
XShot MPP AEB handguard/barrel shroud
Handguard/barrel shroud for the Xshot Motorized Piston Pump. Available in Keymod or MLOK. Also has an integrated QD sling mount. Friction fit- no hardware required.
P
Printables
Tuning Barrels Xshot Motorized Piston Pump
Update 9/4/15: Added chamfered versions for smoother dart feeding. This 54mm barrel reduces the fps without sacrificing accuracy with the included PCAR option. Great for games with young ones or minimized builds. Perfect length to fit…
P
Printables
Micro-Guard Xshot Motorized Piston Pump MPP
At only 60mm long, the Micro-Guard is guaranteed to be the smallest modular handguard available for the piston pump. Perfect for compact builds. Featuring a variety of options ranging from modular to a built-in quad rail. There is an…
P
Printables
Thumb Rest Jam Door Xshot Motorized Piston Pump MPP
Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…
P
Printables
No Spin Battery Stock Xshot Motorized Piston Pump MPP
Update 9/4/25: Added new versions with the cheek rest built in for easier printing. Marked CR in the files. This extended battery stock secures around the original buffer tube and doubles as an anti-spin clamp. Fits the original Xshot…
P
Printables
Short Battery Stock for the Xshot Piston Pump
Short battery stock for the Piston Pump combining the short simple design by ZafC with the utilisation of the original battery door by N8thin. Although this is a remix the battery stock was completely rebuilt from scratch using the two…
P
Printables
Sling Mount Xshot Motorized Piston Pump MPP
Designed to snap into one of the five attachment points built into the MPP. Includes two different styles. Models are oriented how I printed them but you may have better luck with a different orientation. These are more of a decorative…