XShot Longshot O-Ring Barrel Collet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple collet that takes an O-Ring to hold your XShot longshot barrel into place.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 531
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick remix I threw together to allow me and my girlfriend to change barrels interchangeably between our Fury-X and and Longshots, I find the O-Ring system alot nicer to use than a fixed collet as it is alot more convenient.
My own setup is running a 16MM OD Barrel from AKBLASTERMOD, I have not tested this with other barrels if you do use another barrel make sure to leave a comment and I will be happy to adjust things where needed to accommodate other barrel ODs if needed as I only have access to my 16MM barrel right now!
I believe the collet system is based of a sillybutts system? I have no idea
HARDWARE
The O-Ring I am personally using is 19mm OD 2.15 Width and 15MM ID anything close or similar to this should work, I have found its the best O-Ring to use.
The original for the Fury-X recommends a 016 O-Ring which while I did not have access to it, the collets are the same so this should also work here.