XShot Piston Pump Charging Handle Vacation Home
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moves the charging handle to a new location for changed ergo.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you ever wanted a less traditional priming handle, here you go! Perfect for any bullpup builds such as:
https://www.printables.com/model/1399742-xshot-piston-pump-diy-bullpup-kit
Or use it standalone. I won't tell you how to frost your flakes.
Print as indicated in the files section. You'll need a pair of M3x8mm screws to affix the rod to the charging handle cover, one 94180A333 brass heat insert with one M3x15mm screw, and some CA glue for the internal rod. Glue and sand down the sections so there's less of that printed slidey noise when in use. Save the environment, reduce noise pollution through sanded parts! Hopefully between the differing print orientations and the rod guides the linkage won't break under low load too.
DO NOT ATTEMPT TO PRIME IT, YOU WILL MOST LIKELY BREAK IT.
Go forth and create awkward ergonomics!