XShot Fury X Fore Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fore grip for the XShot Fury, though it might fit other blasters with picatinny rails.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 203
- Wydruki
- 1
- Wyświetlenia
- 974
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a fore grip for the XShot Fury X. I have big hands, and other options either didn't work for me, or were too small, or blocked the safety. This one is longer, and sticks out a little from the front of the blaster. This would pair nicely with the picatinny extension mod on here.
It can use a pair of M3x30mm SHCS with a pair of M3 nuts to secure it if needed, though it's pretty snug on it's own.
There is a built in support for the base, but I recommend you slice it with organic supports touching the build plate, as some of the overhangs are a little much. Print it in whatever material you want. PLA should be fine, PETG should be good too. ASA will stand up to the sun much better.
Print settings wise, 0.2 layers, 4 perimeters, 5 top and bottom layers. 20% infill is plenty. Organic supports touching the build plate.