1 / 2
XShot Clip Mania Shroud with Picatinny Rails (extended) — zdjęcie 1
1 / 2

XShot Clip Mania Shroud with Picatinny Rails (extended)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modeled this for my XS CM since i wanted a longer barrel length, and additional rails for accessories. Uses Picatinny.

Ocena
0 / 5
Polubienia
4
Pobrania
26
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial

Basic shroud for XS CL, made in F360. I printed this but it didn't fit properly, so this newer version should allow a little wiggle room. Included both longer and shorter pieces, long one is about twice the size of the stock barrel. Print with strong walls. Personally used tree supports, 5 walls, 25% infill (adaptive cubic). Enjoy and comment if there are something that could be improved.

Tagi