P
Printables
Merkur Futur Shaver Holder Shortened
Just a shorter version of the original.
Wyniki wyszukiwania: short
Liczymy pasujące modele…
P
Printables
Lego Compatible (64807.dat) Minifig Hair Female Short Braided on Sides Hole on Top
This model is compatible with the lego system.
P
Printables
Short spool holder for Creality Ender 3 V3 SE
I needed to lower the spool holder on my printer to clear the cupboard above it, so I made this. It's a copy of the original design, but much shorter. I don't think it will be compatible with runout sensor
P
Printables
100 Short Dart Hex Storage
I was looking for a better storage solution for my short Nerf darts and when I could not find something that fit what I was looking for I decided to create my own. This is Nerf Short dart storage for worker gen 3 short darts. the…
P
Printables
Silly Shell --- 6x Short Darts --- Airtight Barrels (3x2 Short Darts / 18x Foam Balls)
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
P
Printables
Reddot Lens-Protector / Killflash for Short Picatinny Rails (2 Versions available)
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
P
Printables
Molle short lighter holder (Molle držák krátkého zapalovače)
Molle lighter holder for backpack belt, etc. Molle držák zapalovače na batoh opasek atd.
P
Printables
Opel combo / Fiat Doblo anti short circuit ceiling light clip
This ceiling light clip is originnaly a metal part which often causes short circuits in the car so i made a new one . I used ABS avec printed it vertically. You can stick some aluminium tape in it to reflect the light
P
Printables
Lego Compatible (20877.dat) Minifig Hair Female Short Swept Sideways
This model is compatible with the lego system.
P
Printables
Lego Compatible (44751.dat) Minifig Hair Short and Messy
This model is compatible with the lego system.
P
Printables
Umbreon Shortsword
Overall length is around 930mm and features a 12,5mm diameter hole throughout the sword for stability. If you download it and like it give it a rating in the comments😊
P
Printables
Nerf N1 Dart cutter rezised for short darts.
This remix exists to cut down the N1 darts to a size more similar to the average short dart, i did this to try and increase the compatibility with 3d printed mags and especially with stringers like the ones from Leedle Dynamics. The darts…
P
Printables
Strawberry shortcake
Strawberry-shortcake The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
P
Printables
Polydrier filament roller shorter
My polydrier boxes seem to have significantly deeper tabs than the OP's boxes and the standard rollers simply wedge in tight. I made the rollers 2mm shorter while maintaining the roller width for the spools. now there is significant…
P
Printables
Swoopy AFG for Short Rails
A remix of @shoelesshistorian's updated Swoopy Picatinny AFG, with closer bolt spacing so that it works with rails with only 3 or 4 grooves. Specifically based on the stubby/small version of the original.
P
Printables
Short Spiral Planter – 3D Printable Decorative Pot
This 3D printable short spiral planter features a sleek, spiral design that adds a modern aesthetic to any home or office. Its compact size makes it ideal for small plants such as succulents, herbs, or flowers, and the unique spiral…
P
Printables
Voron Bowden ptfe tube guide arm (Short, bearing) Tighter tolerance
I had printed out the original, but the F695 bearing i had was really loose in the arm. I adjusted the bearing tolerance to be 13mm even down from 13.3mm. This seemed to let the bearing I have pop in gently and fit snug. Let me know if…
P
Printables
IKEA clothing rack (TURBO), shortening adapter
Since I have a sloped ceiling, the IKEA Turbo clothing rack is not very space-efficient. To position the rack further to the side, this adapter is designed to shorten it to the desired height. The part shown in the picture is made from…
P
Printables
Shorter Rack Stud and Wrench (More forgiving for lower fidelity printers)
This is a basic edit on the original Rack Stud by Erik Jeppesen to make it shorter and slightly more forgiving for lower-accuracy and lower-fidelity printers.
P
Printables
Silly Shell -- 9x Short Darts -- Airtight Barrels 3x3 Short Darts -- Triple Ramrod
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
P
Printables
Silly Shell -- 12x Short Darts -- Airtight Barrels 3x4 Short Darts -- Triple Ramrod
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
P
Printables
Bullpup Shotgun – 3D Printed Tactical Short-Frame Shotgun Replica
🔫 Bullpup Shotgun – 3D Printed Tactical Short-Frame Shotgun Replica Bring modern firepower to your 3D printed arsenal with this Bullpup Shotgun model — a compact, futuristic shotgun design where the action and magazine are located behind…
P
Printables
Upcycled print fan for upshort cooling
Have you ever wished for a more personal summer breeze…? This cheeky but effective little project repurposes your leftover print fan from the MK4/MK3.9 to MK4S/MK3.9S upgrade and channels airflow right where it’s needed most. Designed to…
P
Printables
Short bath tap spout
My family bathroom had a very long tap spout, which interfered with lower legs and knees of adults and heads of little playing people. Because this is an ‘external’ part of the tap, there was no chance of it adhering to any standard or…
P
Printables
Short VESA mount arm
Short arm for the same great VESA mount by Maverick0197 Same instructions of the original model apply
P
Printables
X Shot Motorized Piston Pump 'Terrier-K/M/XL' short and long handguards
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
P
Printables
Hot Wheels, Matchbox etc. Display Stand (SHORT cards)
Display stand designed for SHORT cards for Matchbox, Hot Wheels and all other model cars on short cards. As you can see on the pics the stand is 25° sloped to the back which proovides a good hold and the clips leave enough space to read…
P
Printables
USB-Drive Implement for Roxon Flex Multitools, short 1-slot
EDIT: I've made a better detachable version! I recommend using it instead: A short 1-slot USB implement. It fits very nicely in my Roxon Mini Flex Companion. For usb drive, you would want to use an ultrasmall drive like this or similar:…
P
Printables
HOn30 Shorty Class B Climax
Here is another simple and beginner friendly HOn30 Freelance Climax, this time though it’s a Class B. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available…
P
Printables
P
Printables
Magnetic Scrap Bin — Short Wiper Arm Edition (Biqu Glacier / Core One)
Choose your holding force. Houses up to three 20mm x 6mm x 2mm rectangular magnets so you can choose how firmly it grips the Core One steel frame . 1 magnet: quickest release 2 magnets: balanced between hold and one hand release 3…
P
Printables
Brio 180 Degrees Turning Shorter - RMX
I made some modifications: Added shorter double-sided version, tracks on both sides. Added shorter version double female connector. Changed connectors as in .pdf file just to be sure (fits Smuk3D's files) Print Settings Printer: Print…
P
Printables
Toy Wood Train Track - Double Connector Shorter - rmx
Just a Smuk3D brio compatible remix. I needed shorter versions. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.2 Infill: 20 % Notes: Printed in PLA with 4 perimeters and 4 top/bottom solid layers. Category:…
P
Printables
G36 Picatinny Carry Handle, short
Shorter version of my picatinny G36 carry handle. It measures 11.618" (295.09mm) in length. I use filament strands to align the rail section. Hardware: V1: 3x 6-32x1.125" Pan head bolts and nuts V2+: 3x M3x25mm Socket head bolts and nuts…
P
Printables
APS - CAM870 - Short Grip Airsoft - Free Download
A short grip for your APS CAM870 A short grip for your APS CAM870. There are 2 versions. Both are available with and without threaded inserts. “Integrated Loop” - Allowes you to use a simple fabric sling adapter. “APS Sling Loop” - Uses…
P
Printables
Short Wall Mount for Tapo C200/C210/C220/C201/C202/C211/C212/C222/C230 (TP-Link webcam)
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
P
Printables
![Model Wendigo (From Short Series) [WORKS!]](https://media.printables.com/media/prints/2f250d03-f15e-4033-ae42-c0695f4e4e03/images/11351631_301dfc55-b483-4b33-9f95-fb36f2271147_88025c1c-db13-43a1-a41f-544ca152f6ad/screenshot-2025-12-06-220014.png)
Model Wendigo (From Short Series) [WORKS!]
Celebration for season 2 coming soon on my short series, Wendigo! Notes: This was one of the longest creations made on this shop. This took over 6 hours to create with holes, eyes, and matched pixel to pixel for the indent of the cloak!…
P
Printables
Lightning Triggers and Short Mag Release for Aeon, Stryker, Nexus
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Be Lightning fast with this hair-trigger for your Dart Zone Aeon, Nexus, and…
P
Printables
Artika Sonolok Fastener-Free Hook (Short Version)
After covering most wall space in my workroom with Artika Sonolok acoustic paneling, I sized this hook model to hang prints using the IKEA VISBÄCK poster hanger. The design sits on top of a wood slat, staying in place through friction…
P
Printables
short but wide dowels
a set of short dowels to repair outdoor wooden planks with rotten screw holes. You can also use it to make clean screw holes in brand new planks. design considerations: the side flaps avoid the dowel to turn when you screw. the ribs…
P
Printables
Fractal Fidget Star w/ Short Handle
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament material: PLA Filament brand: Hatchbox Filament color: Rainbow Dark Notes: Micro Swiss direct drive at 225°C w/ 2mm…
P
Printables
Mini-Z Short Course Truck 4WD | Mini SC24 | 1/24 RC Car (With Assembly Guide)
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the…
P
Printables
Levergun MK3 shortened front end for bcar
This is a shortened front end for the Levergun MK3 to allow a bcar to be fitted on the barrel. This however reduces the tube capacity to a 7 shell config. It mates perfectly with a 31cm barrel. Meant to use a gfz bcar or any bcar with…
P
Printables
Mini-Z Short Course Truck 4WD | Mini SC24 | 1/24 RC Car (Free version)
Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…
P
Printables
G&G ARP9/ARP556 Stock Tube Extension (Shortened)
A shortened stock tube extension for use with an existing G&G stock tube extension.
P
Printables
AICS single shot short action sled
I printed in PETG. A 0.2MM layer height leaves the top fairly rough, but it seems to feed well. I printed the sample in the picture with 15% infill and just 2 wall layers as a test. I'm planning to do another in 35-50% and 4 layers once I…
P
Printables
Prusa Core One vibration-damping legs, Short and Very Short, with TPU bottom and core, no supports needed
These legs come in two length and bolt into the two existing 3mm threaded holes on the bottom of the corners of a Core One. There are two versions: short (adds about 26mm of height) and very short (add about 16mm). Replaces or supplants…
P
Printables
Coffee block : Umikot 58mm Short Tab
I model this little Umikot 58mm short tab block because I really love the original stand of the Umikot design and want it to be integrated into the coffee block :D !
P
Printables
Vulture's Leg - Shortened Remix!
SEE REMIX IF YOUR VULTURE KIT USES THE DRUM SPRING This is a full replacement for the entire front-assembly of the Vulture blaster. This means that every part of the breech, barrel, and magazine assembly have been redone. The only…
P
Printables
Short Jumper Cable Organizer
A remix of a great model to help you organizer your 11cm short jumper wires for solderless breadboarding. Print 2 combs and 2 rails. Print all components flat on the bed. Optional to add supports under the comb on the connector section.
P
Printables
IKEA Skadis Pegboard - Paint Bottle Holder 32.6mm short version mirrored fix
This is a remix of the mirrored Paint Bottle Holder 32.6mm short version by DeGnoss The mirrored versions of the bottom parts were missing the ridge where the top part can slot in. For now I only fixed the 3x2 mirrored bottom model. Image…
P
Printables
Improved Protean short stock
This is a new stock for the protean by Flygonial. I had issues with the short stock so I designed a new version. The main upgrades are: Top battery door with thumbscrew, Heat set inserts for screws. Secure mount of the butt plate.…
P
Printables
Short-haired Guinea Pig Statue Low Poly
Short-haired Guinea Pig Statue Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
P
Printables
Short Wheel Mount for Zanussi Dishwashers
A shorter remix of this great design for Zanussi, AEG, Zanker, Electrolux, etc...
P
Printables
IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis Rear IO Shield
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
P
Printables
Kyosho FZD2 HachiRoku battery mounts, short and long.
Made Custom battery holders as the ones that came with the car were just too bulky and for some batteries got in the way of the cables. Both short and long versions. I have the FZD2 AE86 so I put HachiRoku on it. You are welcome to change…
P
Printables
Strongman Season: Shorts Edition
A fun and stylized strong man figure with a powerful build and a proud belly, wearing casual shorts. Designed to celebrate real strength — not just six-packs 😄 Great for display, painting, or as a conversation starter on your desk. Prints…
P
Printables
Gridfinity bin for Go Pro Shorty
Just slice and print. I've used PETG for better durability, and lightning fill to reduce the amount of filament. Nothing special, fits (tightly) the fully closed tripod Height is 9u, like all my go pro storage for consistency and box is…
P
Printables
Life Is Short. Buy the Tickets. Guitar Pick Sign
Guitar pick–shaped sign featuring the quote “Life is Short. Buy the Tickets.” Perfect for music lovers, guitar players, concert fans, or as a decorative piece in bedrooms, music rooms, studios, or offices. Designed for easy 3D printing…
P
Printables
Lego Compatible (87080.dat) Technic Panel Fairing Smooth #1 (Short)
This model is compatible with the lego system.
P
Printables
Lego Compatible (87086.dat) Technic Panel Fairing Smooth #2 (Short)
This model is compatible with the lego system.
P
Printables
Classic short handguard and battery stock adapter MOSQUITO MK1
Some interestin variations handguard and battery adapter for comfortable shooting in a protective mask (CQB)
P
Printables
Dewalt DW682 Biscuit Joiner Handle- shorter
Shorter handle with improved fillets and attachment
P
Printables
Baofeng UV-82 / Shortie-82 Exoskeleton
Exoskeleton cover for Baofeng UV-82 and Specna Arms Shortie-82 radios. Covers PTT and side buttons as well as preventing accidental volume/power knob adjustment. Allows the change of batteries without taking the exoskeleton off. Files…
P
Printables
Gravitrax short rails organizer
Tired of having your Gravitrax rails to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? This model is for you. Effective & practical way to organize your Gravitrax rails (size 1 & 2) with…
P
Printables
Short handguard for the MHP Vulture
I shortend the Handguard and removed the "front magtube" and "rear barrel" because the Original was a bit too long for me. This reduces the capacity to 5+1. I also used the stock delete piece from @jjeeffff
P
Printables
Picatinny Handstop Shortened
Shorter picatinny handstop When using my front rail mod , it is flush with the front of a JPhage
P
Printables
![Prusa CORE One+ Compact Spool Holder [Short version]](https://media.printables.com/media/prints/fa22c6cf-7479-4177-88c7-3bb28301d7b0/images/11910516_48b47ac3-8976-4a3e-8282-8f501e18afbc_22ccf862-8290-4ca6-9cc5-153c331568b8/img_1344.jpeg)
Prusa CORE One+ Compact Spool Holder [Short version]
[English] This model is a modified, shortened version of the original Prusa filament spool holder : spoolholder-static-r1 . It screws into the standard puck-universal-r1 mount and works exactly the same way as the original Prusa part .…
P
Printables
German Shorthaired Pointer Figurine
A German Shorthaired Pointer figurine with an athletic standing pose and simplified anatomy. Designed for single-color FDM printing as a solid one-piece model with reliable structural strength. Powered by MakerWorld-Image-to-3D (…
P
Printables
PTFE Passthrough for TPU shorter version Core One
I added a template for marking the hole, it's a lot of work, I recommend drilling with a 1.5mm drill and then using a 3mm drill, otherwise there is a risk of cracking the large central part, you need to drill around the circumference with…
P
Printables
Short Wavy Tea Light Holder
Short Wavy Tea Light Holder Here my design of a cute little tealight holder made to suit tea lights with a 38mm diameter or smaller! Very easy and simple to print with no supports needed. For reference the tealight holder in the photos…
P
Printables
Sponge Holder - Extended 20mm - Shortened 7.5mm
The original (now not available) was extended, and now the extended version is shortened by 7.5mm to fit my faucet and sink.
P
Printables
Boaxel Short Bracket
Quick edit to use with 12mm thick by 40mm long board to fit the ikea boaxel.
P
Printables
Smart home shortcut button panel V1.2
This is an upgraded part of the two-button version of the smart home shortcut panel by mothdotmonster . It features enclosed keyboard switches for better protection against dust and a cleaner overall look. Using the Improved Cherry MX…
P
Printables
M-LOK Angled Vertical Foregrip – Short Tactical Grip (AR15 / Airsoft)
Angled Vertical Foregrip (M-Lok) This is made in Shapr3D. Low-profile angled platform with ggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future. I'm adding a 3mf and stl file…
P
Printables
Knurled screw knob (low clearance & filleted & short head) for Copanko Spool holder
I reaaly like the knurled screw desing from @Calmly and the remix by @D1ngsbums, but space is limited in my setup. This version has short head which is around 6mm shorter than the original version. It is not as easy to grab as the…
P
Printables
(Shortened) L114 Lanyard Enclosure for the Heltec T114 v2
(See original source model for printing instructions.)
P
Printables
Tikka T3x Single Feeder – Short Action (.308 / 6.5 Creedmoor)
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
P
Printables
Single Feeder for AICS Short Action
This single feeder replaces the standard AICS short action magazine and allows for convenient single-round loading directly into the action. It is designed for shooters who intentionally run their rifle as a single-shot platform, for…
P
Printables
Lego Compatible (3183c.dat) Plate 1 x 4 with Towball Socket Short with 4 Slots
This model is compatible with the lego system.
P
Printables
Shortened version of V4 suppressor
I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…
P
Printables
FPS Optimized Shell * Rear Loading * X-Shot Excel Ejector Shell Blaster * Short + Elite Dart
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
P
Printables
Short Stack - Food Fighters Toy
"Serving up a double portion of justice!" Enlist the most "well-rounded" member of the Refrigerator Rejects with this high-fidelity replica of the original 1988 Short Stack . This 3D-printable figurine captures the pancake-themed soldier…
P
Printables
Renault 5 E-Tech Trunk Hook (Shorter Versions)
A hook for securing a shopping bag to the rear seat in the trunk to prevent it from tipping over. With this shorter version of the hook, the trunk cover cannot be installed. Please note that it can get quite hot inside the car use PETG or…
P
Printables
Creality Hi extruder cover with door SHORTER VERSION
Creality Hi extruder cover with door SHORTER VERSION version with door to easy acces to extruder electronics short version (better view of the nozzle on the camera) front cutout in nozzle area to better wiev of the nozzle from the front…
P
Printables
Halfords 1/4" socket holder for deep and short
Halfords 1/4" socket holder for holding deep and short sockets along with extension bars
P
Printables
Shorter "better dock mount" for PCB klicky probe
Variation of "dock mount variable part 2". The part is 5.5mm shorter.
P
Printables
Rokenbok Recycling Center Short Ramp
The Recycling Center came with yellow refresh Rokenbok Dozers and ensured that your build would always be messy with Roks and Barrels all over the floor. This model was made as a continuation of me modeling Rokenbok parts that don't have…
P
Printables
Knit Drink Holder - Short Standard
We decided to design a Drink Holder that will hold 12 ounce standard soda cans. We created two version with one one that has a handle and one that is a koozie style that does not have a handle. Each version has a .stl and a painted .3mf…
P
Printables
FPV Drone 4 inch short range Open HD Raspberry Pi Companion Module
You can print in PLA or PETG. PETG will pass more vibrations, but resist crashes better. You will need some screws: m3: 4 x 40mm 9 x 5mm 4 x 10mm m2: 4 x 30mm (for FC) 16 x 5mm (motors) 4x 3mm (camera) This drone is designed for use with…
P
Printables
HSW short hook (rotated)
A short hook for suitable for a HSW wall rotated by 90 degrees I printed it vertical on Prusa Core One so the printing lines make it lock once inserted and the flat surface is the most visible one
P
Printables
Headphone Holder + Cable Hook + Adapter Hole - Short
🎧 Short Skadis Mount – Headphone Holder / Cable Hook / Adapter Hole This is a shorter version of my SKÅDIS mount , designed as a compact and efficient wall solution for organizing your headset and cables. It features: Integrated headphone…
P
Printables
Mini Pencil Case for 6 – Fits 7.2mm x 100mm Short Pencils
Perfect for travel, pocket-sized creativity, or younger hands, this compact print-in-place case holds 6 standard thin pencils (approximately 7.2mm diameter, 100mm length). Whether it's a small coloring set for restaurants or a starter…
P
Printables
Orion ShortTube 80/400 Bathinov Mask
Made a bathinov mask for this telescope. Should fit correctly, might be a little loose,