Shorter Dryer Lint Vacuum Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortened Dryer Lint Vacuum Attachment to fit my Flash Forge Adventurer M5 Pro. Also converted to STL files.
- Ocena
- 0 / 5
- Polubienia
- 448
- Pobrania
- 840
- Wydruki
- 0
- Wyświetlenia
- 6445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a shortened dryer lint vacuum attachment to clean out lint that gets past your dryer lint trap. I just did it on my Samsung dryer and got a little bit out that looked kind of old so I'm glad it's clean in there. I used my older battery powered Hoover 2 in 1 bag less vacuum. I could see needing a longer one, I didn't feel like we needed a longer one but if you do go to the original maker if you want it. I printed it in PETG on my FF Adventurer M5 Pro with a Glacier build plate and I had supports enabled but they weren't used (sorry I forgot to take a pic of it on the build plate).
I like PETG for stuff like this but PCTG or PLA+ or ABS or? It also worked good for me to clean up a little mess and not have to bend over as far. And I used it to clean the bottom of a sliding door track with good results. I preferred picture w clothes in the dryer! The wider opening is nice for regular vacuuming!