PLA Short Smart Compact Temperature Calibration Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tests from 195 - 210 for PLA
- Ocena
- 4,857 / 5
- Polubienia
- 71
- Pobrania
- 2721
- Wydruki
- 10
- Wyświetlenia
- 8900
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend.
Remixed from ([https://www.thingiverse.com/thing:2729076)https://www.thingiverse.com/thing:2729076%5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3 PLA. I didn't need such a wide band of temperatures as the original, and this prints much more quickly than the original.
I changed the floor from the original design as I didn't want to have to print with rafts (the text on the underside of the original floor would sometimes have adhesion issues)
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
One floor is exactly 10 mm and stand is 1.4 mm. Optimized for 0.2 mm layer height.
Category: 3D Printing Tests