1 / 8
Multi-Depth Stationery Holder (Pen, Short Pencil, Scissors) — zdjęcie 1
1 / 8

Multi-Depth Stationery Holder (Pen, Short Pencil, Scissors)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stationery Holder with multiple slots at various depths.

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Standard Digital File License

Stationery Holder with multiple slots at various depths.

Access all stationery without anything getting in the way.

Fig: Short pencils stay easy to reach while stored alongside longer items.

Prints Tested With

  • Material: PLA

  • Print plate: Smooth Plate

  • Infill: 20% Lightning

  • Brim: 10mm

  • Support: None (print standing up)

Happy Printing!

*Advanced printing technique to avoid using support.

Guide to printing it standing up:

  • Use a wide Brim

    • Increase surface contact to prevent prints from slipping out while printing. 

    • Tested with a 10 mm brim on a smooth sheet (best first-layer adhesion for PLA)

    • Usage may vary depending on your first-layer adhesion.

  • Print the provided support and the main model as ONE object. 

    • Both the main model and the support model should be under the same model.

    • This will allow the printer to print a small bridge to hold the body and prevent it from falling as the main body is being created.

fig: A small connector connects the support to the main body.

Tagi