Multi-Depth Stationery Holder (Pen, Short Pencil, Scissors)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stationery Holder with multiple slots at various depths.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
Stationery Holder with multiple slots at various depths.
Access all stationery without anything getting in the way.


Fig: Short pencils stay easy to reach while stored alongside longer items.
Prints Tested With
Material: PLA
Print plate: Smooth Plate
Infill: 20% Lightning
Brim: 10mm
Support: None (print standing up)
Happy Printing!
*Advanced printing technique to avoid using support.
Guide to printing it standing up:
Use a wide Brim
Increase surface contact to prevent prints from slipping out while printing.
Tested with a 10 mm brim on a smooth sheet (best first-layer adhesion for PLA)
Usage may vary depending on your first-layer adhesion.

Print the provided support and the main model as ONE object.
Both the main model and the support model should be under the same model.
This will allow the printer to print a small bridge to hold the body and prevent it from falling as the main body is being created.
See Slant 3D Video : https://www.youtube.com/watch?v=8NKVNwVaZU0&t=205s


fig: A small connector connects the support to the main body.