1 / 10
Prusa core One feet v2 - extra short - with TPU pad inserts — zdjęcie 1
1 / 10

Prusa core One feet v2 - extra short - with TPU pad inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet shortened - cutouts added for TPU pads, which are printed separately

Ocena
4,968 / 5
Polubienia
173
Pobrania
624
Wydruki
32
Wyświetlenia
4289
Oceny
31

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Thanks to Prusa Guy for the very appealing design adapted to the Core One enclosure!

Feet shortened - cutouts added for TPU pads, which are printed separately - the pads can easily be adjusted in height (Z axis) in the slicer - model has a height of 7mm. I printed the pads in TPU A95 - 2 perimeter - 5% gyroid infill - they turned out quite soft - the more infill, the harder the pads become - but I haven't tested them sufficiently yet.

The Core One has a very stable base with these feet.
You can, of course, experiment with different TPU materials, infill patterns, infill densities, and pad heights.

There's also a pad model with a side cutout (for easier replacement) and a model with a 15mm "integrated pad" available - in case anyone wants to print the whole thing.
The 15mm can be shortened in the slicer by cutting.

fastening: 4pc M3x8

Tagi