Prusa core One feet v2 - extra short - with TPU pad inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feet shortened - cutouts added for TPU pads, which are printed separately
- Rating
- 4.968 / 5
- Likes
- 173
- Downloads
- 624
- Makes
- 32
- Views
- 4,289
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to Prusa Guy for the very appealing design adapted to the Core One enclosure!
Feet shortened - cutouts added for TPU pads, which are printed separately - the pads can easily be adjusted in height (Z axis) in the slicer - model has a height of 7mm. I printed the pads in TPU A95 - 2 perimeter - 5% gyroid infill - they turned out quite soft - the more infill, the harder the pads become - but I haven't tested them sufficiently yet.
The Core One has a very stable base with these feet.
You can, of course, experiment with different TPU materials, infill patterns, infill densities, and pad heights.
There's also a pad model with a side cutout (for easier replacement) and a model with a 15mm "integrated pad" available - in case anyone wants to print the whole thing.
The 15mm can be shortened in the slicer by cutting.
fastening: 4pc M3x8