1 / 7
QRP dipole antenna for ham radio, or short wave listening — zdjęcie 1
1 / 7

QRP dipole antenna for ham radio, or short wave listening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact QRP Dipole Antenna Center and End Insulators, Amateur Radio or Shortwave

Ocena
4,833 / 5
Polubienia
130
Pobrania
703
Wydruki
5
Wyświetlenia
4612
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna works well for temporary antenna applications. It can be mounted on a pole (the mast diameter socket is .73") or hung from a tree or structure. The antenna parts print well with PLA or nylon except the gasket which is best printed in TPU. I added an optional cap file to give the option of not using countersunk screws. Added 3 STL files to print spacers of different thickness to give more room for wiring if desired.

Note, user GuyO created a very useful adapter to allow this insulator to the attached to (3/4") NEMA electrical conduit. Link below.

https://www.printables.com/model/692598-dipole-antenna-pole-adapter/related

Tagi