Liczymy pasujące modele…
this is a small centerpiece for a portable dipole or linked dipole. it has space for a balun core and the cables can be directly winded on the centerpiece. there are also some spareholes to hang some other stuff on it. pictures will come…
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
Dipole antenna part. Will be designing end insulators next.
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made…
I do ham radio. An HF wire dipole or EFHW antenna needs to be wound up onto a spool of some sort when not in use. I do 3d printing. I have lots of spools lying around. Perfect for winding up antennas! The exact spool is:…
Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…
This was designed to hold the Waygo 221-2401 Lever Nut. It has a tab under the bridge across the connector to help secure it in place. It has enough clearance that the levers can be raised, but in the closed position, they should fall in…
This is a bracket that holds the Wago 221-2401 wire connector. This bracket has strain relief holes to connect antenna wire to the bracket without any need for mini carabiners or other hooks, etc. The holes are sized for the popular wire…
This adapter along with 2 whips makes a dipole when attached to a painter's stick. If you have seen any videos on ham radio, you will recognize this Chinese antenna accessory. This makes it convenient to make a dipole with collapsible…
A unique 3D printable creation — this Dipole Antenna Feedpoint Cover, Weather Protection, Insulator Housing Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
The Fractal Wingman frame has a camera cage with holes that will accept a small dipole antenna. However, I felt that the antenna was too close to the carbon. I had also experience low link quality at only 1km away, which shouldn't…
a support to hold the antenna perfectly at 120°, perfect for receiving weather satellites such as NOAA and Meteor. The holes in which the antenna fits have a diameter of 7mm
This is a center hub for a homemade wire dipole, using a SMA plug (TE 1052422-1). Drill the 4 holes to 3mm (M3), solder in the wire, use a M3 bolt to connect a ring lug (RS 0433028 ).
3D Printed Antenna Holder for V-Dipole (137MHz Weather Satellites) Overview This project is a simple and practical antenna holder designed to mount a V-Dipole antenna for receiving weather satellite signals at 137 MHz. Using a 20mm PVC…
These mounts allow you to connect a 5.6m whip (or pair for a dipole) to create a portable HF antenna. The toroid (size 140) is held in place with zip ties that are fed through the body of the part. You will see that the bill of materials…
This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…
A bracket to create a dipole antenna using 1/2" (5/8" (16mm) actual OD) copper pipe, would work with EMT also. Designed to be bolted together will work with M4 bolts, or #10-24, or #10-32 bolts. The hole in the main body was sized for a…
Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”
Mini dipole antenna base with BNC. I designed this for QRP operations with my IC-705 radio. Uses 4mm screws and has an optional 5mm hanger hole and wire strain relief holes for 20 gauge wire. I use 22 gauge teflon coated wire. Also…
I have a vertical antenna that has a ground spike with a M10 thread on the top. I wanted to rase the antenna off the ground and use it as a POTA Performer. Since I have a Buddipole tripod I can use for the antenna support I modified the…
This is an enclosure for an end fed half wave dipole antenna transformer. It is sized for a Fair Rite 264351002 ferrite core and includes a post to hold the core securely. For 3-30MHz, the transformer is a 14 turn transformer wound with…
This is a simple mount to create a 120° V dipole antenna, using the popular M10 telescopic rods. Here is a general parts list, your mileage may vary since I brought some components at a local hardware store: Telescopic rods:…
I like HamRadioDude's wire winder design, but wanted band numbers on the winder to indicate what it's tuned for. Haven't printed this yet but you may want to add minor supports at the bottom for the numbers.
I liked the separator by DO7HAR but i felt like it wasn't wide enough. So i created from scratch very similar separator which keeps cables 25 mm apart. It is tight enough that it won't fall or move around the cable. I used it with 2 mm…
Center part of the doublet antenna which i made from 2 mm wide old military cable. It has holes to secure the cables with zip ties. I used it together with my line separator…
center support for dipole, windom wire type antennas for ham radio, drip guard is not necessary, just extra protection from water getting in the coax connector. Thanks 73 KE4ARI
Dipole center insulator v2. Added clearance for a nut on the backside of the SO239 connector. Reinforced support.
Yet another Dipole Center Insulator, designed to hold a Common mode choke and uses Wago 221 connectors for the antenna wire connection. Added to additional variants. Am more compact one also with SO239 and a Winder-Style design with BNC.…
Wall mount for a simple DIY dipole antenna, for the antenna design see https://electronics-diy.com/electronic_schematic.php?id=542 Prints without supports Open source
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
Design Concept The model is a ring-shaped spacer designed with eight evenly distributed holes, ideal for mechanical or e
After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes through to lock them in place. Rafts: No Supports: No Infill: 20
After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes through to lock them in place. Rafts: No Supports: No Infill: 20 Tags
Remix of KB9RLW's ladder line dipole center to use an SO-239 connector.
Print Orientation Should look like: Supports might be needed for the K6ARK inspired split ring ( Antenna Mast Pole Tip Split Ring by Adam Kimmerly | Download free STL model | Printables.com ) Set overhang angle to 88degrees: If you have…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/d459KBbGIG8 Category: 3D Printing
This is my drawing of linked dipole isulators. This have been maded by other hams, but those i do in thinkercad, for 15m/20m dipole antena. Ptinted in PLA (I only work in PLA), because is for my POTA activations. You can project your link…
Best for all hams, we need to identify ours antenna, this is a way cool for doing that! Now you can download: 40 MTS 10-15-20 MTS END FEED 10 DIPOLE 20 DIPOLE 40 DIPOLE Let me know if you find usefull with a like! thanks!
Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…
Features Variable frequency, user NanoVNA for fine tuning, Horizontal or vertical polarization, 3/8" (large tripod screw) for H and V, 1/4" (small tripod screw) for V polarization, dipole-base-your-mount for your convenience - use any…
I created this tool for a dipole antenna to download images from the NOAA weather satellites. A very good torial on how to download these images can be found on Saveitforparts' youtube channel: The tool i created features places to fit a…
Simple dipole insulator for ham radio (Small wire antenna). I used 26awg. Enjoy. Tell a friend, or don't. Category: Electronics
UPDATE, I hung 15 pounds with this. Seems legit M5 threaded post and a S hook. Inspired by something called "Cord Lock" at Ace hardware. As you can see, you can use it for strain relief OR for a end insulator on a dipole, efhw, etc.…
2nd version of my wire link, insulator, and whatever you want. all in one. From the original thing ( https://www.thingiverse.com/thing:6724591 ). Truth is, I like the S style thing better and it seems stronger (testing neeeded). However,…
Please share this with other printing groups, forums, etc. This winder is a little more Versatile than other iterations. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller…
Lost the rubber cap for my buddipole telescoping whip , which also keeps the last piece from going in too far, inhibiting deploying the antenna. I printed the cap in PETG and was able to get a snug enough friction fit for it not to slide…
Overview This set includes all the components needed to assemble a 110° V-dipole antenna designed for NOAA weather satellite reception . The design allows for easy construction using readily available materials and provides a simple way…
Elément diameter : 4 mm for 15 mm boom. use aluminum for the elements and brass for the dipole. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . This design remains experimental errors are possible. Particular attention will be…
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made…
Added cable relief, zip tie holes and suspension hole to the original design
WORK IN PROGRESS - near final revisions. *Please leave feedback on this tutorial and the prints. It will only help to improve the overall model. I am a big fan of open-source and improving upon established products and standards. I am…
I do ham radio. An HF wire dipole or EFHW antenna needs to be wound up onto a spool of some sort when not in use. I do 3d printing. I have lots of spools lying around. Perfect for winding up antennas! The exact spool is:…
Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…
This was designed to hold the Waygo 221-2401 Lever Nut. It has a tab under the bridge across the connector to help secure it in place. It has enough clearance that the levers can be raised, but in the closed position, they should fall in…
This is a bracket that holds the Wago 221-2401 wire connector. This bracket has strain relief holes to connect antenna wire to the bracket without any need for mini carabiners or other hooks, etc. The holes are sized for the popular wire…
This adapter along with 2 whips makes a dipole when attached to a painter's stick. If you have seen any videos on ham radio, you will recognize this Chinese antenna accessory. This makes it convenient to make a dipole with collapsible…
A unique 3D printable creation — this Dipole Antenna Feedpoint Cover, Weather Protection, Insulator Housing Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
The Fractal Wingman frame has a camera cage with holes that will accept a small dipole antenna. However, I felt that the antenna was too close to the carbon. I had also experience low link quality at only 1km away, which shouldn't…
Holder for a center-fed dipole -- it was specifically designed for the Orqa Ghost qT antenna, which is shown in the photo. MUST be printed with a flex material, I used TPU 95A. It withstands aggressive flying (even crashes...) fine, but…
printed with PETG-GF using stock settings on a centurion carbon printer the are just under a inch in diameter at .978" and just over 1-1/2" long at 1.576" the holes are 1/4" .250" you can scale it larger or smaller. happy hamming 73 from…
My custom designed slinky antenna. People have been making slinky dipoles for longer than i have been around, but i decided to design some parts to make assembly easier. I included a picture of the exact slinky i used. I bought mine from…
This is a 3D-printed center insulator for building a dipole antenna. Two versions are included: one for an SO-239 connector and one for a BNC connector. The enclosure has room for a 1:1 current balun. I used an FT140-43 toroid for mine…
Designed to use an extendable paint pole as a center support for a dipole. Prints in two pieces to maximize strength and simplify supports. Requires two #10-24x1 machine screws and nuts plus one SO-239 connector. The idea is the two…
This is my portable antenna I have used for years. I utilize a Chinese stream pole 7m bought off Ebay. Antenna hanger is used to slip on the mast. It can also be used to with an EFHW in a inverted V. Which allows it to be perfect every…
This is my portable antenna I have used for years. I utilize a Chinese stream pole 7m bought off Ebay. Antenna hanger is used to slip on the mast. It can also be used to with an EFHW in a inverted V. Which allows it to be perfect every…
A cover to protect your 2.4 ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. I build mine with .8mm copper wire if you used 1mm copper then scale up by 2%. Print two and press…
Jig for making a 2.4ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. There is also a cover for it to protect the element in my other things.…
This is a simple spacer for 6 wire cage antennas. The 3mm holes should be fine for 18 ga insulated wire. After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes…
This is a center structure for building dipole antennas using window line or ladder line as the actual antenna radiator. I made it to use a BNC panel mount connector for a coax feedline. It could be modified for an SO-239 using most…
A simple dipole center structure with a hole for a BNC panel mount connector and space for a T80 torroid 1:1 balun. For field use. Category: Electronics
ELRS Dipole antenna holder. I have a BETAFPV Nano Rx, but it should fit any dipole antenna. The distance is 18mm in between. The fit is as snug as it gets , it requires some patience to insert the antenna ends. Print Settings Printer:…
My off center fed dipole is 264 feet long and the center piece broke. I designed this to be more robust to allow the connections as well as rope and hardware for hanging in the trees.
work in progress. mount to take the Buddipole mast with the ½" pipe thread (versatee mount) to a standard tripod mount (¼-20) to mount the arrow antenna. the adapter will need a ¼-20 bolt added.
Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal
Feed point and end insulators for a 20m DIY Dipole Kit. It is designed for RG-58 but RG-8x should work too, coax to be ziptied to it to secure it hanging vertically. Wires just tie to the holes on each end. Printed in PETG, although PLA…
You are doing me a big favor by clicking the Like button :-) Good antennas are expensive. This it will cost you around 15 euros and works super. I use it at 86 - 87 MHz as a transmission antenna with 50 Watt Power. It has an excellent SWR…
The oryginal antenna of Frsky R9m was too bad to use it, so I used the coaxial wire of this antenna, replaced the active and passive element and used this T joint to make a new antenna - well adjusted for 868MHz. Category: DIY
I change the base to fit a PVC tube of 32mm in diameter. I have included the fusion file if you need to customize it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.32 Infill: 25%…
2 SIZE AVAILABLE, for QRP or 100W~ simple box for matching unit SOTA POTA portable operation. could be used to make a Dipole, EFHW, EFRW antenna. radio plug into the BNC, the Antenna into the Banana plug. item required: -4mm banana plug…
I wanted to build a link dipole for Parks On The Air operations that would be lightweight and easy to put up. I designed these pieces around 22 gauge stranded wire and a bulkhead mount SO-239 connector. Use whatever connector you want on…
This plug is used to secure the toggles of the new Buddipole injection-molded guying ring.
This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…
This is a simple antenna that you can make out of scrap lying around. All You need is: -4x M8 nut -2x M8 threaded rods (35 cm) -Magnet (I got mine from a broken speaker - it is 6 cm in diameter) -Coax cable
Wire insulator for wire antennas, dipole etc. Category: Hobby
3d Printed Dipole insulator Light-weight and ideal for temporary portable operation with some wire and zip ties. Recently tested and used with a 80m doublet used portable during a 24 hour contest. Print Settings Printer Brand: RepRap…
This is a remix of the cap from the original model to give a little more surface to handle the cap. The original model uses a reverse thread, and this one does as well.
this is a very simple peace to mount a Dragon Link 433Mhz dipole antenna on the Sky Hero Spy Y6 hexacopter you will nee
A small housing to create a DIY Dipole Antenna for a Stratux (ADS-B or FLARM) out of a DVB-T antenna cable.
A basic first iteration dipole areal frame designed for high altitude balloons Print instructions Category: Hobby Summary A basic first iteration dipole areal frame designed for high altitude balloons
Look at https://dl2man.de/linked-dipole/ for detailed instructions and look at the Video for seeing me setting it up, doing all the measurements and some QSOs. All files Printed from PETG in 0,15mm Layer hight, no supports needed. Make a…
This is a very simple dipole for UHF frequencies. I designed it to hold 70cm elements, although I've also built it as a 1.25m antenna. I haven't tried elements for 2m band yet, I believe they would be too long. I have another design that…
