Accessory wire keeper and label for the QRP dipole antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps the folded wire at each end of the dipole antenna elements in contact with the radiating section.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
These holder/labels work as accessories to the QRP dipole antenna center and end insulators. When cutting a wire to make the two elements of the dipole antenna I like to cut about 12” longer than expected to allow for tuning. After lacing the end of the wire through the end insulator I double it back, these holders will keep the wire close to the radiating section. In addition there are labels to identify the amateur radio band the wire is tuned for. If printed at 100% the overall length is 1.6" and the holes are .2"