1 / 4
Amateur Radio Dipole Feedpoint and Insulators
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dipole Feedpoint and Insulators for a DIY amateur radio dipole
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 814
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (47)Powiązane
Feed point and end insulators for a 20m DIY Dipole Kit. It is designed for RG-58 but RG-8x should work too, coax to be ziptied to it to secure it hanging vertically. Wires just tie to the holes on each end.
Printed in PETG, although PLA would probably work too.