Linked Wire Antenna (e.g. Dipole or EFHW) Links
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Labeled links for assembling a linked dipole or EFHW from 1.5mm² isolated wire.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 312
- Wydruki
- 2
- Wyświetlenia
- 1420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here). With the wire I used (simple 1.5mm² wire from a local hardware shop), no additional material was required to fix the connection. Due to the friction within the bends, everything stayed in place by itself.
The difference to the other designs is that I wanted to be able to use the shorter parts (e.g. only 20m and 30m) independently. Therefore the holes in the links are large enough to completely remove the piece for the next lower band and attach a rope instead.
The prints in the pictures were done using the 0.3mm layer draft profile from PrusaSlicer.
Update 18.12.2025:
Added different variants with 75mm (original) and 100mm width and 7mm (original), 5mm and 3mm hole diameter.
Added separate labels file for multicolour printing.
Removed the variant with sharp edges.