1 / 8
Horizontal&vertical 6m/2m/70cm multiband dipole base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiband portable dipole with extending antenna elements workable 50–450 MHz
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Features
- Variable frequency, user NanoVNA for fine tuning,
- Horizontal or vertical polarization,
- 3/8" (large tripod screw) for H and V, 1/4" (small tripod screw) for V polarization,
- dipole-base-your-mount for your convenience - use any screw (at 102%) in slicer as negative volume for custom mounts,
- F360 and STEP files are included for easy remixing.
Printing instructions
Print 4 perimeters, 30% infill, PETG.
Supports for the bottom hexagon overhangs only, the rest is OK.
BOM
- 2x 140mm telescopic whip with M4 thread https://a.aliexpress.com/_EvAOfyg
- 2x M4x30 flathead
- reduction to your preffered coax connector, I've used BNC dipole adapter, piece of wire with soldered eyelets
Assembly
- Apply a bit of soap to your M4 nuts and prime the threads from the antenna side with electric screwdriver.
- Apply a bit of soap to the tripod screws and ease up mounting threads.
- Mount the screws with eyelets from inside, there are holes for Phillips screwdriver in the opposing sides (see photos).