Liczymy pasujące modele…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
Assortment of simple nail-in cable clips. Cable diameters: 3-12mm in 1mm steps. Nail diameter: 2mm Category: DIY
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
xpectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 20mm/s…
The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5-10mm/s…
Collection of Gridfinity basic cups height 4 (32mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
22.02.24 - Added corner K1C logo 28.11.23 - Added ventilation grille (2 versions) for the 22mm version is printed without support in one model, nothing needs to be assembled (Disassembled model for if you want to assemble from 2 different…
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
🎒 Backpack Clip 32mm A simple and reliable clip designed to attach gear to your backpack, bag, or belt. 🔩 🎯 Perfect for: Attaching gear to backpacks 🎒 Hiking & outdoor use 🥾 Everyday carry (EDC) 🔑 Happy printing! 🙌 📸 Printed one? Post a…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.
Credit: https://www.myminifactory.com/users/Ravens
I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
Keep your chain on fake cogs to help with chain cleaning after taking off rear wheel. This tool fits 12mm thru axles. Sized with slop to allow shifting of the derailleur. No reason to pay $$ for one from Park Tool etc.. No overhangs, no…
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
Various dead skeletons. These are meant to be used as scatter terrain. 28/32mm scale. Did these people die like this? Is there a story behind each skeleton? Or is some twisted freak posing the bones for fun? I guess that's up to you!…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
A simple adapter to connect two 32mm / 1.25" pool hoses. That's it that's all..
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 30mm/s…
You can use a 3660 4s Brushless motor. The connection betwen the prop and the motor is a Gt2 Pulley with pressfit. You should print the whole Thing in 0.2mm and a fibre reinforced Material. The Flow corrector gets glued to the back of the…
Note: “Detect Thin Walls” May need to be enabled if printing a wall width the same as your nozzle width. All cubes are 20mm x 20mm externally. Cube perimeters and base are the same respective size. For example, the 0.6mm cube's walls are…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
The badge on my E91 looked terrible and I've decided to design and print a replacement, because this is what people with 3D printers do, right? This badge has a diameter of 82mm and is designed to replace the hood badge of a BMW E90 , I…
My friend asked me to make him some 32mm bases so I wiped this up real quick. Very quick and simple print. .4mm Nozzle .2mm Layer Height
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
Patch dispenser designed to accommodate 22mm square patches provided by Pistol New Zealand (PNZ) for IPSC targets. Features a check window and roll directional guide. Print flat side down. Have printed once so far in PLA+, very strong and…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
IBC tank reducer from 64mm to 1" inch + new 5/4" inch version available redukce na IBC nádrž z 64mm na 1" coul + novinka na výběr i verze 5/4" coul 5/4" version not tested, please give feedback verze 5/4" není otestovaná, prosím o zpětnou…
same as orig with the supports removed
When you buy an Intex pool, it's coming with a small pump and hoses, generally too small for the pool volume : you have to buy a bigger pump with sand filter, generally sold with only ONE hose adaptor. This thing allow you to print the…
Various Cable Clips Diameter from 3-12mm up to 5 cables Nail-Diameter: 2mm
Part is printed with PETG and need partial supports.
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
Remix Brother Label Design. (thank you elumspe ) The information used referred to the contents of bambu studio. (Do not download the stl file. it used for upload post) for brother 12mm film. I haven't tested anything other than 12mm, but…
I included two variants, hollow and solid - if you want the top to have some texture and you have a textured heatbed, print the model upside down and it will look nice - solid is there so if you wanna print it rightside up then you can…
This goes through the filter hole in an Intex or Bestway above ground pool. Is made for 32mm hoses and uses the plastic clamps that come with the pool, but should fit snug as well. Used this to connect a hose from the pump to the skimmer…
A radius measuring set (for both inner and outer radii), designed to fit within a 1x2x3 Gridfinity box. Notes: I didn't include 1 mm radius because honestly, I don't think it's really needed. The individual pieces default to being printed…
Cconduit / pipe snap-in clamp. single screw tested with 30% infill and 25mm conduit Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: no-name PVA white Category: DIY
I recently purchased a well-used camera lens which came with a lens cap that was missing the springs on one side. Seeing as I own a 3D printer and have access to the internet, that should be a not-really-a-problem that is easy to solve. I…
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
Holder can mount with screews, glue or cable ties. 2025: I add a OpenSCAD file. Now you can easily design your holder for your special need. Hint: create a 2 hole holder with a “base_length = 8;”
Positive and negative counters for Magic: the gathering covering from 0/0 to +-6/+-6. Created from scratch, but inspired by BMacIntosh's +1/+1 dice counters. Printed with .4mm nozzle at .2mm layer height, and a color swap for the last few…
62mm propellers with a hole for a Lego axle. Print with supports, dry your filament and ensure good cooling. The blobs on the surface are because of wet filament.
I needed a sturdy and small rope tensioner, so this is that. The arrows on the inside mesh with the roller, so that it can't spin freely once the rope is in the seated position. It is surprisingly strong. The clearence might be too tight…
The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…
Finally, I can print decent keycaps on an FDM machine. And with a 0.2mm nozzle, you can as well!! This model is designed and optimized to be printed using a 0.2mm nozzle. I haven't tested with other nozzle sizes. I bought a 0.2mm…
Noctua design fan grill sized for 92mm fans like the Noctua NF-A9
A simple gauge pod for the Nissan S13 that mounts below the dash. It replaces the oem vent assembly. fits 52mm gauges and 60mm gauges My design is a straight replacement of the oem vent assembly. no cutting, no drilling, 100% reversible.…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
This is a Desert themed house you can print for tabletop wargames such as Star Wars: Legion, 40k, etc. It prints all at once with no supports needed. If you are interested in other terrain files, check us out at imperialterrain.com Print…
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Free STL - Beastman Charger V4 32mm pre-supported This set includes: - Beastman Charger warrior + pre-support + lys - unique base + pre-support + lys Join us on Tribes here, or on Patreon ! Join us to receive Monthly release of…
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
I went looking for the single layer test print, I couldn't find it within 0.06 seconds so I just made one up real quick. It should obviously work with both the MK4 and MK3's as they are the same build volume :) Printed at 0.2mm layer…
Print the toyota logo a little smaller (I have it set up on the 3mf file it should be 49.94mm on X) Sand them smooth or add resin and paint in silver and black or whatever you like Glue them together Clip it in and enjoy! I will upload…
Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works for all Kobra 2 models This is taller than stock PSU cover you will need taller feet Here a link to some feet that work well Bambu Lab Anti-Vibration Feet List…
Adapter for using 32mm/1-1/4" attachments on 35mm Bosch or Festool vacuum hose. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 25% Filament: Hatchbox PLA Black Notes: This is…
I need connect 2 bowden tubes so I remixed Improved Tapered thread bowden coupling PC4-M6 (nut is not remixed)
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Update: Version 2 uploaded. Grab files with _v2. Latches in joint were made little stronger. Arc for radius 6 (inner on ruler) made larger angle, to made it more accessible. ----- Printing tips: Print with 2 colors for better reading.…
Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet. Print the design with higher temperature materials like PETG… ABS, ASA Recommended to print the design laying on the side. Cut 14x17 mm rectangle from 2mm silicon sheet. Insert the…
Minor update: Still works if you've installed the CFS kit! Original Post: The chain riser was one of the first mods I printed and used. I quickly upgraded my printer with the frame riser extension, and the included chain riser didn't have…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 23 to 22mm which is slightly less than 1" and is suitable for many Makita and similar sanders, and connect to the CAMLOCK end. It may be a slightly loose fit…
Recommended items to complete this crane are hot glue, BBQ skewers, Popsicle sticks, rubber bands, 30 minute epoxy, kite string, small-sized hand-held drill and bits, four 360 degree rotating 9 gram servos, one receiver, transmitter, and…
Just mirrored the 32mm connector instead of the garden hose. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Notes: Just mirrored the 32mm…
Improved version of my older 52mm lens cap. Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports. Print one 1x body with your selected design and 1x spring
fully working calipers with 0.02mm precision
This is a enclosure designed for the CYD NM RF Hat (commonly used with the Cheap Yellow Display). The case protects the electronics while keeping full access to the screen, antennas, and connectors. The lid is secured using 6×2 mm magnets…
Solaris Urbino IV 10 UPDATE aug'20 | 3D Warehouse (sketchup.com) - odsud staženo
I have the Alpenfohn Blackridge CPU cooler and decided to design my own fan spacer rather than buying the whole Noctua NA-FD1 foam spacer kit. I included models for 1-10mm in thickness in 1mm increments. The 2mm spacer is perfect for…
This is a gauge mount to fit 52mm gauges into a MK3 golf central air vent. The design replaces the existing air vent and includes a back plate to allow mounting of a variety of different gauges. The back plate has two print in place…
This pipe holder for swimming pools is the perfect solution for keeping pipes in place and ensuring their stability. Designed for easy installation and use, it is compatible with most standard pool pipes. Features: Universal Design:…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
This soldering tool is designed for 8mm, 10pin, or 12mm LED strips with 2, 3, 4, 5, or 6 pads. It's so simple, feed your strip in under the bridges, feed through your wire through the holes (you can drill out the holes if your printer…
Clamps for holding down your workpiece on a cnc router. The clamps are designed for holding down materials with a thickness of 2mm to 18 mm. There are 3 different sizes for the bolt that goes through, M5, M6 and ¼ inch. Best is to use a…
Best printed with PETG for it's flexibility. PLA works too but may be more difficult to snap on the tent pole. I've had luck with infill anywhere between 10-30%. This was designed to print easily with no supports needed. Updated…
2mm thick guitar pick. There are 2 different versions, and the hexagonal version prevents the pick from slipping out of the hand. You can print the top layer in iron mode.
After receiving a Creality Sprite Pro extruder to upgrade an Ender 3 Pro printer, I found that my touch sensor was hanging just below the hot end nozzle. I found several models via Printables and Thingiverse but could not find one I…
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/star-wars-battlefront-ii/#Darth-Vader,-Kampf https://ko-fi.com/dwdzhde Vader in Kampfposition aus dem Spiel Star Wars: Battlefront 2. Skaliert auf…
Ranging from 4mm thick to 8mm thick these are for RC cars with axles up to M4 that use standard 2mm x 10mm pins. These will also work for smaller 1/16 and 1/18 scale that use M3 and 1.5mm x 10mm pins. The 4mm thick adapter will allow you…
Please Read Description Only thing to be aware of is the Z offset in Nozzle Settings! Currently set at 0 to ensure your bed isn't going to get damaged but for my machine its set to -0.12, First layer prints at 0.15mm so allowing for great…
Printing Speed: 120mm/s Bed Temperature: 60º C Extruder Temperature: 200º C Wall Thickness: 3-4 wall lines Designed for a 32mm (1 1/4") pole. Tripod_Collar_32mm.stl Tripod_Leg_32mm.stl Directional_Collar_32mm.stl Directional_Arm_32mm.stl…
This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine. If you test other types and they work, please let me know in the comment section so i can add them as…
A basic towel hook for a rod diameter of 22 mm. Print it with 100% infill for a maximum on strength. Nothing special but very usefull and a all day helper. UPDATE 06.04.2021: i added a reinforced version of the towel hook because…
Hi, to download Air Hose Connector Repair 6mm, 8mm, 10mm and 12mm. Connector is my production from the beginning of the planning stage to the final stage, printed, corrected until satisfactory results are achieved, the tested works very…
![Nail-in Cable Clip [3-12mm Assortment]](https://media.printables.com/media/prints/633203/images/5012989_b04f63af-5a91-4e4b-bcdb-120b551b2321_1964838e-5184-4627-9b23-d65ca6a17420/large_display_assortment_633203.png)
![Blank 32mm miniature base [Solid and hollow]](https://media.printables.com/media/prints/1131093/images/8534553_9f89b494-fd4b-4aa8-bbcd-335ae4053dae_94f88f29-f1a7-43f6-9169-45886fa741ba/32.png)
