1 / 11
70mm, 72mm, 75mm, 82mm, and Windex 23oz Bottle Holders for the Multiboard Storage System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle holders of various sizes I use in my printer room.
- Ocena
- 5 / 5
- Polubienia
- 243
- Pobrania
- 1427
- Wydruki
- 10
- Wyświetlenia
- 5579
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 10) (Komentarze: 20)Remiksy (0)Kolekcje (596)Powiązane
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed.
Added a holder for 75mm bottles.
Added new versions of all the bottle holes with a Bolt Hole for the Large Multiboard Bolts. I use the 9mm Flat Head. You can use longer if you have your tiles spaced from the wall. The holder still has the 2 connectors at the bottom, but with the threaded large bolt in the top this will NOT fall off the wall. If I have trouble screwing it in I use a 100mm Push Fit Peg as a wrench.
