1 / 11
Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet — zdjęcie 1
1 / 11

Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet

Ocena
5 / 5
Polubienia
235
Pobrania
786
Wydruki
16
Wyświetlenia
12 428
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet.

 

Print the design with higher temperature materials like PETG… ABS, ASA

Recommended to print the design laying on the side.

Cut 14x17 mm rectangle from 2mm silicon sheet.

Insert the silicon sheet into the groove.

Use the original screw from the bambulab PTFE nozzle cleaner, to fix the clenar in the printer.

 

And it's done.

 

2023.07.22: Added version II

Lowered the overall 3D printed part height to prevent any filament sticking on it.

For this design, you need to use smaller 14x14x2 mm silicon sheet piece.

You can use 4 edges of the silicone sheet while it wears out.

 

I have the 2mm silicon sheet from aliexpress:

https://www.aliexpress.com/item/1005004715715286.html

Rated for 200°C but it can handle higher temperatures check comment section.

 

Additional higher rated silicone sheet from roadshow@roadshow_441674

Aliexpress Link for Silicone Rubber Sheet rated for up to 250°C:
(make sure that 2mm thickness is selected)

 https://www.aliexpress.us/item/3256804210227859.html 

 

Tagi