CAMLOCK ADAPTER FOR 22MM TOOL OUTLET
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ShopVac CAMLOCK adapter to fit a 50mm (two inch) vacuum hose to any power tool with a nominal 25mm connection point.
- Ocena
- 4,857 / 5
- Polubienia
- 188
- Pobrania
- 767
- Wydruki
- 7
- Wyświetlenia
- 2508
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DOWNLOAD CAMLOCK and find more accessories HERE.
This fitting tapers from 23 to 22mm which is slightly less than 1" and is suitable for many Makita and similar sanders, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the actual machine. I use a few wraps of PFTE plumbers tape to ensure a perfect fit, but a smear of bathroom silicone will make a permanent connection.
Prints without supports.
I have printed in PLA 0.2mm QUALITY settings. The print may seem a little tight when first inserted into the Camlock fitting, that is by design and it will ease after its been worked around a bit.