LED Strip Soldering tools 2pin-6pin 8mm-12mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soldering an LED strip but cables moving too much? LED pads too close and wires touching? This is the solution for you!
- Ocena
- 5 / 5
- Polubienia
- 153
- Pobrania
- 694
- Wydruki
- 3
- Wyświetlenia
- 3131
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This soldering tool is designed for 8mm, 10pin, or 12mm LED strips with 2, 3, 4, 5, or 6 pads.
It's so simple, feed your strip in under the bridges, feed through your wire through the holes (you can drill out the holes if your printer undersizes them or you want bigger wire). Solder from the sides and youre done!
You can either print one for each strip and leave them after soldering or if you're confident in the strength of your solder joints (showoff) you can pull the wires through and re-use the tool.
Please post your makes and remix your own mounts.