1 / 1
LED Strip Soldering tools 2pin-6pin 8mm-12mm — image 1

LED Strip Soldering tools 2pin-6pin 8mm-12mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Soldering an LED strip but cables moving too much? LED pads too close and wires touching? This is the solution for you!

Rating
5 / 5
Likes
153
Downloads
694
Makes
3
Views
3,131
Reviews
3

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This soldering tool is designed for 8mm, 10pin, or 12mm LED strips with 2, 3, 4, 5, or 6 pads.

It's so simple, feed your strip in under the bridges, feed through your wire through the holes (you can drill out the holes if your printer undersizes them or you want bigger wire). Solder from the sides and youre done!

You can either print one for each strip and leave them after soldering or if you're confident in the strength of your solder joints (showoff) you can pull the wires through and re-use the tool.

Please post your makes and remix your own mounts.

Tags