Counting matching models…
This soldering tool is designed for 8mm, 10pin, or 12mm LED strips with 2, 3, 4, 5, or 6 pads. It's so simple, feed your strip in under the bridges, feed through your wire through the holes (you can drill out the holes if your printer…
Mould for cable "aftercare" for Multiplex 6pin connector used in RC models. Print instructions Printed with ASA, dipped in acetone (optional). Layer height 0,2mm. The same mould used for the male and female connector. Be careful with the…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
VGA / RGB to HDMI HD-VC9900 Video Converter Board Case with 6pin DIN & Wemos D1 Mini Wifi Designed to house the Wemos D1 Mini to use with the customer firmware https://github.com/ramapcsx2/gbs-control Cut-outs for all the connectors…
GBS-8200 RGB to VGA Video Converter Board Case with 6pin DIN & Wemos D1 Mini Wifi Designed to house the Wemos D1 Mini to use with the customer firmware https://github.com/ramapcsx2/gbs-control Cut-outs for all the connectors including…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Little case for the 26pin Greaseweazle adapter board soldered to a STM32 "Blue Pill". Includes easy access all of the jumpers etc... so no need to take it out of the box. Top does clip in but I usually glue it for stability.…
Convertor for Molex 150l 16 pin thats used on onewheel controller to XT60. It also has holder for rESCue stepdown - https://rescue.company.site/products/rESCue-DC-DC-converter-p418590804 and optional hole for neopixel wires. For better…
https://it.aliexpress.com/item/1005004569914022.html?spm=a2g0o.order_list.order_list_main.137.21ef3696lhiffB&gatewayAdapt=glo2ita…
I wanted to provide a 3.3V pin input to the ERCF v1.1 microfit connector, so I modified the existing design to accommodate a Molex MicroFit 3.0 6-pin connector instead of the original 5-pin connector.
I wanted to provide a 3.3V pin input to the ERCF v1.1 microfit connector, so I modified the existing design to accommodate a Molex MicroFit 3.0 6-pin connector instead of the original 5-pin connector.
