1 / 1
Led strip clip/holder (WS2812, other 12mm LED Strips) — zdjęcie 1

Led strip clip/holder (WS2812, other 12mm LED Strips)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a clip designed for all 12mm width LED strips for attachmend on different surfaces with adhesive tape or glue.

Ocena
5 / 5
Polubienia
64
Pobrania
633
Wydruki
8
Wyświetlenia
2387
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine.

If you test other types and they work, please let me know in the comment section so i can add them as compatible!

This clip can be easily slipped over a led strip and then mounted on different surfaces with some adhesive tape or glue without any screws and drilling.

3 Variations at different lengths:

10 mm length
20 mm length
40 mm length

Testet on an Anycubic i3 Mega with 0,1mm resolution and no supports. Some higher resolution might work as well.

Tagi