1 / 7
ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts — zdjęcie 1
1 / 7

ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts (migrated from Thingiverse)

Ocena
0 / 5
Polubienia
4
Pobrania
44
Wydruki
0
Wyświetlenia
712
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

868Mhz / 915MHz Antenna Dipole cover and mounts

To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament layers continuity.

Notes

  • pipe for active and passive antenna wires length
  • handlers for M3 screws (mounted below plate) and for M2 standoff (between plates)
  • in my case used for ExpressLRS on FrSky (evil) r9mini RX
  • print at 0.12 layer height, PETG recommended

Versions

  • 2023-06-10 v1.0 Initial version
  • 2023-06-18 v1.0 Added ..._pipmount_v1.0 (integrated arm ziptie or insulation take moount)

Category: DIY

Tagi